NDLI: Design method of shading coil in electromagnetic mechanism of AC contactor based on FEA

Please wait, while we are loading the content...

2015 18th International Conference on Electrical Machines and Systems (ICEMS)

2014 17th International Conference on Electrical Machines and Systems (ICEMS)

2013 International Conference on Electrical Machines and Systems (ICEMS)

2012 15th International Conference on Electrical Machines and Systems (ICEMS)

2011 International Conference on Electrical Machines and Systems

2010 International Conference on Electrical Machines and Systems

2009 International Conference on Electrical Machines and Systems

2008 International Conference on Electrical Machines and Systems

Chairman's message

Multiphase machine theory and its applications

Estimation of parameters for induction motor’s analytical model by direct search method

A speed sensorless vector control system of induction motors using current observer and taking into account iron loss

Transient DC Side Short Circuit Currents of 12-phase generator-rectifier system

Synchronous generator model identification using half-complex wavelet nonlinear ARX network

Analysis of rotor equivalent parameters of solid-rotor synchronous motors

Investigation for the flashover phenomenon in DC machines

Flashover and transformer voltage

Basic studies for accurate commutation analysis which enables commutation spark energy estimation

Passivity-based control of induction motor based on euler-lagrange (EL) model with flexible damping

Load characteristics of induction motor made of Soft Magnetic Composite (SMC)

Experimental transient characteristics of a three-phase squirrel-cage induction motor under unbalanced voltage condition

Optimal design of rotor slot of three phase induction motor with die-cast copper rotor cage

Experimental study of radial distributions of electromagnetic vibration and noise in three-phase squirrel-cage induction motor at no-load

A dynamic decoupling method for speed-sensorless vector control of induction motor

Practical speed estimation method for induction motor vector control system using digital signal processor(DSP)

Rotor resistance and inductance calculation of single-phase induction motors with skin effect consideration

A novel V/F control system based on stator voltage oriented method

Stability improvement of V/F controlled induction motor driver systems based on reactive current compensation

Research on voltage-reduce energy saving strategy for three-phase induction motor

A modified voltage model flux estimation of induction motors

Time-stepping finite element analysis of wye and delta connection influence on induction motor copper losses under over-voltage condition

Single-phase self-regulated self-excited induction generator with series capacitance

Determination of the high frequency inductance profile of surface Mounted Permanent Magnet synchronous motors

A novel direct torque control for permanent magnet synchronous motor drive

Simulation of three-phase short-circuit at the terminals of synchronous machine

Analysis of the no-load harmonic electromagnetic field of synchronous generator using tooth flux method

Design of PID excitation controllers for synchronous generators based on fuzzy RBF neural network

Design and simulation of a traction motor for variable speed drive

Simulation for researching stator insulation structure of 135MW evaporative cooling turbo-generator by marinating

The design of an electrical fault-waveform regenerator

Applied engineering design of Three Gorges’ 840MVA hydro-generator with close loop self circulating evaporative cooling system

Research of power system stabilizer based on prony on-line identification and neural network control

Coupling and decoupling network for surge immunity test on power lines

Experimental study on magnetizing and loss characteristics of electrical strip for different frequencies

A rapid method for load testing and efficiency measurement of three-phase induction motors

Development of exposed environment of overhead transmission lines on mice

Optimization design of linear Halbach array

Cylindrical linear Halbach arrays for permanent magnet tubular linear machines

Design of three-stage screw-type labyrinth seal using on main drainage motor in mine and research of its experiment

Design of cooperative manufacturing system based on Multi-agent

On study of visualization in electrical machinery CAD

Cyclic shift genetic algorithm applied to design optimization of electromagnetic devices

Shield-shape design for vacuum circuit breakers

The design of high-frequency switching power supply for field test of high-voltage circuit breaker

Design method of shading coil in electromagnetic mechanism of AC contactor based on FEA

Optimization design of permanent magnet synchronous motor for the electrical spindle

Research for the design scheme of bearingless motors

Structure and finite element analysis on AC two-degree-freedom hybrid magnetic bearing

Design of Static Phase Generator system based on Wireless Communication

Nozzle optimization of SF6 circuit breaker based on artificial neural network and genetic algorithm

A systematic and qualitative assessment method and software design for energy efficiency of typical electric machine systems with pumps and fans

The measurement and prediction of iron loss under nonsinusoidal voltage waveform with arbitrary frequency

A drive-less oparating by communication based train control

Wavelet filter and changing rate based tire runout test algorithm

A highly accurate ECT calibration system based on virtual instrument technology

Denoising of test data of sudden three-phase short based on wavelet algorithm

Mechanical properties test for wiper motors using wavelet ridge

Comparison of IEEE 112 and new IEC standard 60034-2-1

Determination of critical electric field of soil under lightning impulse voltage

Simulation test study on shielding failure of center-phase of 1000kV transmission lines erected on ZBS2 tower

Research on three phase synthetic test expert system of high voltage circuit breaker

Research of TV secondary voltage drop measure method based on clock synchronism

Analysis of novel gearless traction oil pumping unit frame based on UG software

Field and thrust analysis of permanent magnet linear synchronous motor based on different shapes of permanent magnet

A brushless DC motor driving experiment based on 74HCT238 decoder for beginners

The design and implement of virtual laboratory system for movement control system based on internet

Multi-level practice training mode of electrical engineering education

A discussion of terrace-oriented method in Motor and Driving experiment teaching

Study and practice of teaching reform approach for electrical machinery

A simplified determination of the permanent magnet (PM) eddy current losses due to slotting in a PM rotating motor

Comparison of vibration characteristics of several interior permanent magnet synchronous motors

Air friction loss calculation of high speed permanent magnet machines

A fast solving technique for dynamic characteristic analysis of electromagnetic repulsive system

Sequential response surface model method for the optimization design of SMES

High-frequency characteristics of the resonator’s finite element simulation

The narrow sense chain-making and chain-coupling theorems of element grid in 2-D problems

3D dynamic finite element analysis of electromagnetic problems involving movement

Finite element method analysis of the electromagnetic field of Brushless Doubly-Fed Machine

Armature reaction finite element computation of surface-mounted brushless DC motors

The characteristic calculation of reluctance Brushless Doubly-fed Machine (RBDFM) using tooth flux method

Air-gap magnetic field design optimization for U-shaped ironless permanent magnet linear synchronous motors

The calculation of temperature field on a permanent magnet wind generator

Calculation and analysis of the 3D magnetic field of Halbach PM array based on equivalent magnetic charge method

Study of solid rotor line-start PMSM operating performance

A novel hybrid finite element method-boundary element method with double scalar potentials for open boundary magnetostatic problems

Application of RBFEM in the fast design optimization electric field

A novel FEM-EFGM model on electromagnetic field computation

Study of weight functions in the Element-Free Galerkin Method

Application of eddy load in electromagnetic acoustic emission

The combined MVP-MSP computation of load performance for a hybrid excitation claw-pole alternator

The method for reducing starting resistant moment by suitable top rake of magnetic pole in Permanent Magnet Generator driven by wind turbine

A RBF based iterative method for nonlinear electromagnetic problems

A global optimal technique based on Moving Least Square and Improved Differential Evolution

Analysis of electromagnetic field and performance on traction motor for variable speed drive

A study on passive magnetic bearing with Halbach magnetized array

Study of induction eddy current distribution based on FEM

Analysis and control of a micromanipulation stage based on electromagnetic levitation

Calculation and measurement of potential and electric field distribution along 1000 kV AC transmission line composite insulator

Numerical and experimental results from a vertical yoke system for measuring magnetic properties of Fe-Si steel sheets

Solution of inductances for bearingless switched reluctance motors with 3-D FEM based on different degree of freedom

The influence of slit construction on the eddy current braking torque considered by 3D FEM analysis

Current distribution and thermal effects analysis on the sliding contact arrangement in circuit breaker

The study of an independent tunable electron gun for a compact Terahertz Source Based on Free Electron Lasers

Study on numerical simulation of electrical fields inside isolated phase bus based on ANSOFT

Optimal design of permanent MRI magnet based on Orthogonal test method combined with Response Surface Model

Calculation of parameters in transformer winding based on the model of multi-conductor transmission line

Analysis of electromagnetic radiation of VSC-HVDC converter station based on dipole theory

Analysis of eddy current density distribution in slotless traveling wave inductor

The research on effect of nozzle throat diameter of high voltage SF6 circuit breaker on breaking capability

Study on eddy current loss and heat-transfer character of stator windings in synchronous generator

Loss analysis of transformer core using FEM method taking account of anisotropy

Finite element analysis of windings electric field of transformer

Research on eddy loss in cooling configuration of conduction-cooled high temperature superconducting magnet

Robust global optimal method for electromagnetic device design using approximation models

Parallel computation the potential distribution and electric field along the 500kV line composite insulators

Development of evaporative cooling technology for hydrogenerators

A study on the method of temperature distribution control in electromagnetism induction heating

Study about temperature modeling of travelling wave induction heating

Research on the calculation of thermal resistances of thermal-liquid coupled network model of huge hydro-generator’s stator

Loss and heat computations of damper bars in large tubular hydro-generator

Calculation and measurement of magnetic field of vehicles for city mass transportation

3D thermal analysis of water cooling induction motor used for HEV

The optimal design and 3D thermal analysis of stator for evaporative cooling hydrogenerator of Three Gorges right bank underground hydropower station

Study on conducted EMI from operation of electromagnetic relay contacts

Study on EMS of solid state relay (SSR) with voltage dips and short interruptions

A novel control strategy for vibration reduction in the permanent magnet motor drive system with eccentric load

Designing air cooling rotor for evaporative cooling turbo generator

A study on the reduction of vibration and acoustic noise for brushless DC motor

3-D finite element analysis of dynamic characteristics of electromagnetic relay interfered by voltage dips and short interruptions

Analysis and optimization for electromagnetic susceptibility of solid state relay in the presence of incident wave

The study of two novel induction heating technology

Stiffness and critical speed calculation of magnetic bearing-rotor system based on FEA

Calculation of temperature distribution in the stator of larger evaporative cooling turbo-generator

A novel coupled magneto-thermal-flow analysis for temperature rise prediction of power apparatus

The temperature distribution of the stator bar in the evaporative cooling system of the hydro-generator on flow blocked

The research on air cooling condenser of natural temperature close-loop self-circulating evaporative cooling electromagnetic equipment

Analysis of temperature field in switched reluctance motor based on finite-element

Research of core loss of permanent magnet synchronous motor (PMSM) in AC servo system

Sensitivity of the two-phase flow pressure drop to influence factors in the evaporative cooling generator

Study of two-phase flow void fraction in evaporative generator stator bar

Vibration analysis and improvement of stator core in Three Gorges hydro-generator

Fundamental study of the powder core used low noise and low vibration motor

Investigation of electromagnetic vibration of permanent magnet brushless machines

Study on vibro-acoustics of polyphase, fractional slot, surface mounted permanent magnet disc machines

Three-dimensional field calculation and analysis of electromagnetic vibration and noise for disk permanent magnet synchronous machines

Active vibration control strategy based on Expert PID pitch control of variable speed wind turbine

The analysis of an adaptive sinusoidal interference cancellation system

An aliasing compensation method for wavelet packet transform

Nonlinear dynamics of rotor system in electrical spindle equipped with AMB

Research on noise spectrum characteristics of traction motor system for electric buses based on sound intensity

The effect of digital filter on pulsed high magnetic measuring signal

Development and use of pulsed magnets

The magnetization measuring system in pulsed high magnetic field

Design of the protection inductor for the power supply of the pulsed magnetic field facility with ANSYS

The new design of magnetic detecting model in magnetic induction tomography

Design principles for optimized pulsed magnets

Design on the protection inductor for the capacitor bank of Wuhan Pulsed High Magnetic Field facility

High field magnet made of second generation high temperature superconducting wire

Wuhan Pulsed High Magnetic Field center

Development of a point coil magnetic field measurement system for Pulsed High Magnetic Fields

Separate excitation of HTS YBCO magnet consisting of pancake windings

Development of high gradient magnetic filter with evaporative cooling system

Design of a 12 MJ capacitor bank of the pulsed high magnetic field facility at HUST, Wuhan, China

Optimized design and numerical simulation of non-destructive pulsed magnets

Application of magnetorhelogocal fluids technology in accelerometers

Study on novel measuring method for rotor axial displacement with displacement sensor fixed on radial direction in magnetic bearing

Detection of point-plane corona discharges using the solar blind photosensitive tube

Monitoring wind turbine condition by the approach of Empirical Mode Decomposition

Ultrasonic fault machinery monitoring by using the Wigner-Ville and Choi-Williams distributions

An in-site system based-on ARM of faults diagnostic with the amplitude recovery method

A novel method for the early detection of broken rotor bars in squirrel cage induction motors

A study on fault diagnosis of hydroelectric generator based on D-S evidence theory

Detection methods of broken rotor bar fault in squirrel cage induction motor with light-load

On-line fault detection of inter-turn short circuits in turbo-generator rotor windings

Steady-state error analysis and digital correction for capacitor voltage transformers

Fiber detecting of high voltage insulator contamination grades based on PSO-SVM

Fault diagnosis of the inter-turn short circuit in rotor windings based on wavelet analysis

Fault diagnosis of rotor winding inter-turn short circuit in turbine-generator based on BP neural network

Measurement of very fast transient overvoltages at the transformer entrance

Induction motor parameter determination technique using artificial neural networks

Partial discharge in light-load 161KV power transformer

Extraction of partial discharge signal feature with chaos oscillator and adaptive lifting wavelet

Automatic suppression of white noise and repetitive pulses interference in on-site partial discharge monitoring

Development of portable partial discharge monitor for generator stator windings in hydro power stations

An acoustic emission method for on-line monitoring the contamination-causing flashover of insulator

In-service motor monitoring and energy management system based on wireless sensor networks

Application of the Prony’s method for induction machine stator fault diagnosis

Harmonic detection algorithm based on recursive filter

A novel online diagnosis of brushless generator rotary rectifier fault

Using voltage analysis method to diagnose the winding faults of induction motor

Experimental study of the overheating decomposition products of perfluorocarbon used in evaporative cooling transformers

Optical observation on forms of vacuum switching arc in short-gap

A high accuracy FFT algorithm for induction motor sensor-less speed estimation

Speed estimate for maglev train based on linear induction motor

Wireless rotor temperature measurement system based on MSP430 and nRF401

Study of wavelet packet in the electromagnetic acoustic emission signal processing

Power quality analysis and system simulation on permanent magnet direct-drive wind turbine

Summary of research on hidden failures in protection systems

PLC and PC based monitoring and control system of the switchgear testing laboratory

Detection of rotor bar breaking fault in induction motors based on Hilbert modulus gyration radius of filtered stator current signal

Multi-physics field simulation for CYCIAE-100

Progress in Virtual Prototyping for design of compact cyclotrons

Superconducting accelerator-based PKU-THz Facility

Breakdown properties on gas rail gap switch with operating voltage of ±100kV

Analysis by homogenization theory and experimental research of linear accelerator collinear load coating

Small valley gap magnet design for a 10MeV PET cyclotron

The mechanical instability of the BPMs at HLS

Photon beam position monitor using beam profile system for HLS

Research of signal-processing methods in four-quadrant photodetector

An experimental study of local magnetic field intensity effects on the discharge characterization of Hall thrusters

The study of some key technologies for a compact Terahertz Source Based on FEL

Design of a hybrid undulator for compact terahertz radiation source

Numerical optimized design of cooling system for 8MeV irradiation accelerator

Conceptual design of control system for FEL Terahertz Radiation Source

Effect of magnetic field in the ATON-type hall thruster buffer chamber on discharge current characteristics

Study of a rail-coil hybrid electromagnetic launcher

A recurrent wavelet neural network controller with improved particle swarm optimization for linear synchronous motor drive

Current harmonics reduction of square wave inverter by using adjustable filter for high speed motor power supply

Indirect magnetic field directional method of Brushless doubly-fed machine with wish reluctance rotor based on slip frequency rotating frame

Some considerations of eddy current proximity sensor applied for motor speed measurement

Modeling and control for Tubular Linear Permanent Magnet Synchronous machines with gas springs in drilling applications

A novel switching table to suppress unreasonable torque ripple for the PMSM DTC drives

Effects and detection of misaligned position sensor in AC servo drive system with filtered current delay

Position sensorless control for interior permanent magnet synchronous motors using H∞ flux observer

Analysis and experiment of a 6-phase bearingless induction motor

Sensorless direct torque control of high speed PMSM based on variable structure sliding mode

Digital Charge Control of boost converter with constant power machine load

A two-phase SVPWM strategy for dead-time compensation

Synthesis compensation using Iterative learning control for periodic force ripple of permanent magnet linear motor

A sensorless rotor position detecting method for self-controlled synchronous motors

A laboratory test bench for electrical traction drives

Implementation of two-axis highly accurate position control of space-vector PWM based microstepping bipolar drive

Design of auxiliary front-end converters for adjustable speed drives systems

Design of PMSM control system based on fuzzy logic

Modelling and implementation of an improved DSVM scheme for PMSM DTC

Fuzzy-based linear motion control of a non-contacting steel plate conveyance system

The rapid soft re-switching technology of three-phase induction motors

Full digital control strategy for soft-switching gas metal arc welding machine

Design and implementation of modular three-phase utility-interactive converter

Four-switch three-phase inverter fed DTC system considering DC-link voltage imbalance

A novel stability improvement method for V/F controlled induction motor drive systems

Switched Reluctance starter/generator system in low voltage

Stabilization of unstable equilibrium points by time-delayed feedback control method in an induction motor drive system

A deadbeat direct torque control of surface permanent magnet synchronous machines using space vector modulation

Comparative study of PI, sliding mode and fuzzy logic controller for rotor field oriented controlled induction motor drives

Visual state feedback digital control of a linear synchronous motor using generic video-camera signal

A phase detection method for harmonics and unbalanced voltage

Control strategy for VSC-HVDC under unbalanced input voltages

Rating lowering of 300W inverter module using PFC

Three-phase PWM inverters with three-phase output transformer and three-phase filter inductor

A slip frequency correction method applied to induction machine indirect vector control system

Passivity-based control of three phase voltage source PWM rectifiers based on PCHD model

A parameter setting method for double closed-loop vector control of voltage source PWM rectifier

Key power semiconductor devices and development trends

A novel direct power control strategy for three-level PWM rectifier based on fixed synthesizing vectors

Principle and simulation of a 5-phase bearingless permanent magnet-type synchronous motor

Determining of Hopf bifurcation point and its stability analysis in an induction motor drive system

A new direct power control strategy for grid connected voltage source converters

A new soft switching bidirectional buck or boost DC-DC converter

A novel contactless auto-generation (36V) system

Online efficiency optimization of stator-doubly-fed doubly salient motor based on a loss model

Theoretic analysis and experimental study of a novel bridgeless partial active PFC

Research on a new three phase series hybrid active power filter

Outlook of roles and necessities of power electronics for VF-power system of future large aircraft

Study on the control system for the petroleum well plug removal robot with electrical impulse

General strategy for multiphase and multilevel system based on analytical meaning of PWM

Development of an active power filter physical simulator connected with RTDS

Design and experiment of RSD-based great power pulse generation circuit

A novel type single-stage ZVS-PWM high-frequency load resonant inverter with high performance PFC rectifier for consumer IH appliances

The model-free learning enhanced motion control of DC motor

PWM control of five-phase five-level inverter based on H-bridge

Multi-motor synchronous system based on neural network control

Crossed-feedback control of dual-redundancy permanent magnetic brushless dc servo system used in electro-hydrostatic actuator

Hyper space vector control for brushless direct current drives

Carrier modulation of four-leg matrix converter based on FPGA

Analysis and experiment of multi-phase induction motor drives for electrical propulsion

Compact magnetic compression repetitive pulsed power generator based on IGBT

High frequency region position sensor-less vector control of interior permanent magnet synchronous motor drives

Speed estimation of induction motor by using observer and PWM carrier frequency components

A current-limiting protection strategy for the combined three-phase inverter

The capacitor commutated converter (CCC) as an alternative for application in slip-energy recovery drives

One synthesizing vectors method of improving three-level DTC output performance

Robust sliding-mode control for induction motor drive with RBF neural network based rotor speed estimation

Realization of a SPWM inverter for multi-phase induction motor drives

A new location method for Permanent Magnet Synchronous Motors

The fault tolerant control on a dual-channel brushless DC motor servo system

Modelling and simulation of space vector modulation techniques for Matrix Converters: Analysis of different switching strategies

The influence of dead-time on AC servo motor’s low-speed operation

Effect of inverter’s dead-time on the dynamic characteristics of Permanent Magnet Synchronous Motor systems

A novel algorithm for space vector modulated two-stage matrix converter

Research of Brushless Direct Circuit Linear Motor robust set-point control based on Robust L2

Design and realization of PMSM vector control IP core based on FPGA

Research and simulation on constant switching frequency of direct torque control(DTC)

A hybrid approach of sensorless rotor position self-sensing for brushless Dc motor

A new approach to DTC-SVM for induction motor drives

Instantaneous torque control of a permanent magnet wind power generator without a position sensor

Study on the protection of asymmetric bridge circuit for switched reluctance motor

Study on switched reluctance motor using three-phase bridge inverter: Analysis and comparison with asymmetric bridge

A three-level induction motors DTC algorithm based on fixed synthesizing vectors with reduced flux and torque ripples

Nonlinear feedback linearization control for SRM-rotor suspending in shaft direction

Adaptive sliding mode speed control of synchronous reluctance motor drive using input-output feedback linearization

Adaptive sliding mode speed control of surface permanent magnet synchronous motor using input-output feedback linearization

Research of speed sensorless vector control of an induction motor based on model reference adaptive system

Mechanical sensorless control of SPMSM based on HF signal Injection and Kalman filter

A new topology for operating three-phase induction motors connected to single-phase supply

DC offset and parameter compensated stator flux estimator of sensorless vector controlled induction motor drive

Analysis of the VSI with small DC-link capacitor for Electric Vehicles

A novel line-to-line back EMF calculation for sensorless brushless DC motor drives

Ultra fast PMSM drive for turbo-blower application

Position detecting for the air-cored TPMLSM with linear Hall-effect sensors

Dead-time effect and a neutral point voltage control for a single-phase NPC converter

Real-time DSP-based computation-efficient speed-sensorless drive of induction motors

Studies on position detection of permanent magnet spherical stepper motor based on machine vision

Universal voltage vector controller for induction motor based on motional electromotive force

The design on Adaptive Front Lighting System (AFS) based on brushless DC motor

New modulation scheme for matrix converter driving brushless DC motor

A novel instantaneous values control strategy for matrix converters

Low cost sensorless vector control for PMSM compressors

A closed loop control method to correct position phase for sensorless Brushless DC motor

A PSoC-based parallel inductor connection driver of ultrasonic motor

Speed sensorless field-oriented control based on the novel voltage model and phase difference

Fuzzy logic energy management strategy for supercapacitor-based energy saving system for variable-speed motor drives

Control of indirect matrix converter based on finite state machine

Model reference adaptive control for permanent magnet synchronous motor servo system

A novel torque servo control system for the flywheel motor

Fuzzy direct torque control based on space vector modulation with new integrator for flux estimation in induction motors

The study on a dual-feed-forward control of DVR to mitigate the impact of voltage sags caused by induction motor starting

Research on asymmetry characteristic of the rotor in dual-redundancy PMSM system

Digital control without line voltage sensing for a three phase bidirectional inverter

The research of speed control for induction motor based on dynamic recurrent neural network

Based on fuzzy-neural network of high speed linear induce motor efficiency optimization (HSLIMEO)

Predictive control for a permanent magnet synchronous motor using automatic tuning Smith-predictor with optimal parameter mismatch

A Novel SPWM control strategy to reduce common-mode voltage in three-phase four-leg inverters

Research on H∞ mixed sensitivity control of brushless doubly-fed motor

Study on control method of magnetic bearing for high speed machine

A novel fuzzy PID velocity control of linear elevator driven by the permanent magnet linear synchronous motor

The study on the constant switching frequency direct torque controlled induction motor drive with a fuzzy sliding mode speed controller

H∞ robust two-degree-of-freedom control for high rise elevator driven by permanent magnet linear synchronous motor

Speed sensorless control of a linear synchronous motor using state observer on d-q reference frame

Synchrodrive system of dual linear motors based on hybrid fuzzy PID control

Three-level NPC inverter with IGCT for high power AC drives

A novel approach of fixed joint multi-motor power balance control

Study on neutral-point balancing for three-level space voltage vector pulse-width modulation inverter

Research and simulation on ANN speed-sensorless three-level inverter vector control system for induction motor

The application of SAPWM rectify technology on the aircraft electric actuator

Sneak circuit analysis method based on generalized connection matrix for power converters

A study of electric double layer capacitors improving electric network voltage fluctuation for urban railway transit

The research on protection of over-voltage about NPC three-level medium voltage motor drives

Self-tuning vector control system of induction machines based on dual EKF

Rapid control prototyping of fifteen-phase induction motor drives based on dSPACE

Path tracking control for a four wheel differentially steered vision robot

Design of position servo-system of BLDCM based on frequency domain method

Unity power factor control for PMSM position sensorless drive

Sensorless control of surface permanent magnet synchronous motor at low speed

Sensorless control of salient PMSM with EKF of speed and rotor position

Application of a self-tuning two degree of freedom PID controller based on fuzzy inference for PMSM

A novel method to improve voltage sag rid-through for battery powered PM electric drive system

Implementation of full-order flux observer for speed sensorless drives of induction motor at high speeds

An adaptive control based on fuzzy hierarchical approach for the permanent magnet linear synchronous motor

A method of power loss calculation for RB-IGBT matrix converter

Pulse Width Modulation strategies and a novel mixed control method for diode-clamped five-level inverter

Wide-range control of output voltage in Z-source inverter by neural network

Research on neutral-point potential balancing for three-level NPC voltage source inverter

An online optimization approach to SHEPWM applied to NPC inverter

Analysis of topology and modulation strategy for a Hybrid multilevel inverter

Double-loop control and stability analysis based on three-phase Buck-Boost inverter

Medium voltage drive based on the H bridge inverter and its common-mode voltage

Optimization of neutral shift in cell-fault treatment for cascaded H-bridge inverter

The torque oscillation study in the motor soft starting process with discrete variable frequency method

Research on linear servo motor actuator and its control technique of high-voltage circuit breaker

A universal digital control platform for electrical machines based on the programmable logic devices and digital signal processors technology

The design of dynamic integrated testing system using digital AC servo motor based on LabVIEW

Design and analysis of control system of a proton exchange membrane fuel cell directly connected with a DC motor

The development of active controllable energy feedback device based on d-q model

A novel family of ZCS-PWM converters minimizing additional conduction loss

Flux-weakening control of constant power of stator-doubly-fed doubly salient motor for electric vehicles

Analysis and comparison of two control strategies for three-phase series-parallel UPS

Design and implementation of a new hybrid learning control strategy for three-phase UPS

Research of interleaved three-phase bidirectional DC/DC converter based on control type soft switching

Research on novel input-paralleled output-paralleled half-bridge converter

Uniform modulation principle and ideal operation status of parallel inverters

Hard switching and soft switching inverters efficiency evaluation

The research on novel repetitive control technology of inverter

Beat-less control technology and its application in three-level inverter

Design of voltage controller of single-phase inverter for harmonic rejection

Proportional-resonant controller of high power 400Hz inverter in stationary frame

Analysis and selection of switch for double modes inverter in micro-grid system

Research on the symmetrical four-phase voltage produced by thethree-phase four-bridge inverter

Modeling and simulation of an improved PLL-controlled circuit for series resonant inverter

Hybrid variable-band hysteresis DPM and repetitive control for a 400 Hz inverter

A novel control method of active power filter using five-level cascaded inverter

Research of RCD clamp snubber for high power combined three-phase inverter

Research of space vector PWM inverter based on the neural network

The sliding mode control for air plasma cutting inverter power source

A nural network indentification method for the inverter

Inverter cutting power source with double close loop control

A novel single-phase three-level PWM rectifier with asymmetrical legs

Analysis and design of main circuit parameters of new industry rectifier system with SVC

Study on control strategy of three phase high power factor PWM rectifier

Comparative study on the current decoupled control for the three-phase voltage-source PWM rectifier in the synchronous reference frame

Vector-controlled PWM rectifier with hysteresis regulators

A linearization voltage control strategy of three-phase PWM rectifier

Modeling and control rule of three-phase Boost-type rectifier as switched linear systems

A three-level rectifier with reduced number of power switches based on one-cycle control

The research of input-output linearization and stabilization analysis of internal dynamics on the CCM Boost converter

Comprehensive analysis of power loss in the output diode of flyback switching converter operating in DCM and CCM

Synthetic design of the transformer in flyback switching AC-DC converters

Time-frequency and wavelet transforms of EMI dynamic spectrum in chaotic converter

A new soft switching current-fed isolated PWM DC_DC converter

A new direct sinusoidal input/output ac-ac converter with unidirectional switches

Research of phase-shift full-bridge ZCT converter based on digital control

A novel three-phase power factor correction converter based on active clamp technique

Analysis and design of high frequency asymmetrical half bridge flyback converter

Multilevel current source converter based on SHEPWM

Improved three-phase single-stage isolated PFC converter with voltage-clamping in primary side

The influence of distributed parameters of transformer on the performance of high power DC-DC converter for Fuel Cell Vehicles

The applications of bidirectional full-bridge DC-DC isolated converter in UPQC

Bidirectional power flow Z-source AC-AC converter

Optimized design of energy storage components for three-level neutral point clamped back-to-back converter

Control for Diode-Clamped Three-Level Half Bridge converter

Integrated magnetic for hybrid full-bridge three-level LLC resonant converter

Failure simulation and protection strategy of mid-voltage three-level frequency converter

Research on digital controlled converter for AC power electronics burn-in test with Energy Feedback

An improved Two-Transistor Forward Converter with integrated magnetics

Thermal analysis and design of power electronic parts assembled by heat sink in flyback switching AC to DC converters with case enveloped

Research on electrical locomotive 110V DC power supply based on power factor correction

Research info the application of split-phase coupling array integration inductance in four-phase voltage regulator module

Research of dead-time compensation in SVPWM modulator

Overlap carrier wave phase shift SVPWM modulation control technique research

A novel bipolar bi-directional buck-boost converter

An improved control strategy for the current source back-to-back converters

A novel method for improving the fault tolerance of transformerless cascade PWM STATCOM

A novel dynamic voltage restorer with flywheel energy storage system

Research on multi-winding DSEM of the aerial ground power supply unit

Hybrid compensation for harmonic, reactive power and unbalance under dq0 coordinates

Three-phase active power filter based on simplified space vector control

A novel decoupling control based on D-statcom

A Real-time digital simulation and testing system for SVC used in EAF power supply system

A new control strategy for three-phase four-wire UPQC with zero steady-state error

Convergence process of the active power filter using adaptive inverse modeling

Comparison of Hybrid Active Power Filter topologies and principles

Control strategy of DC voltage in three-phase four-wire shunt Active Power Filter

The research of three-phase three-wire shunt Active Power Filter current loop multiple control

The analysis and compensation of dead-time effects on Active Power Filter in α-β coordinate

Advanced thyristor switched capacitors and its effect on improving the power quality

Deadbeat current control based on new state-observer for VSR

A VSC-HVDC fuzzy controller for improving the stability of AC/DC power system

Modeling and simulation of Dynamic Voltage Restorer based on super capacitor energy storage

A nonlinear control strategy for UPQC

The shunt active power filter based on ip-iq detecting method and hysteresis control

A novel active power filter for the voltage-source type harmonic source

A novel power quality conditioner suitable for high-voltage distribution grids

A sort of harmonic suppression and reactive power compensation device

Identification of hybrid active compensation topology for electrified railway load

Image recognition technology and optimized control algorithm of the self-tracing smart car based on CMOS camera sensor

Study on closed-loop control of shock process for permanent magnet shaker in Particle Impact Noise Detection

A dimmable electronic ballast for wired or wireless remote control of electrodeless fluorescent lamp group lighting systems

A study on the multiple cold cathode fluorescent lamp drive with capacitive coupling

Two-stage metal halide lamp electronic ballast with constant output-power control

Digital and analog hybrid control of multiphase power modules with low output-voltage and high output-current

An efficient power management system for biped robot

Simplified predictive current controller for bidirectional voltage source PWM rectifier based on state feedback decoupling

Principle and parameter design for an innovated radial-axial hybrid magnetic bearing

Research on a novel gate drive circuit of Integrated Gate Commutated Thyristor

A method for electrical network voltage compensation without PLL based on coordinate transformation

Stacked high/low voltage level H-bridge circuit for gradient amplifier of MRI system

An arbitrary waveform power amplifier adopting Switch-Linear Hybrid technology

Analysis of transmission mechanism and efficiency of resonance coupling wireless energy transfer system

Closed loop test platform for SVC controller based on RTDS

Bifurcations and chaos in H-bridge DC chopper under peak-current control

Research and realization of a Pulse Width Modulation technique based on voltage space vectors

Research of system of energy recycling on Rubber-Tyred Gantry crane

Identification method for transfer function of multi-DOFs motion stage

Study of control strategies for transmission system of electrical wheels autonomous dump truck

Nonlinear phenomena analysis in thyristor

P-Fuzzy-PID control in a machine tool magnetic suspension system

Experimental study on high-current pulse generator for electromagnetically induced acoustic emission

A neuromuscular-like control of electric vehicle

Comparison between Periodic Function space based power theory and traditional power theory

A current-control mode three-level PWM switching power amplifier for active magnetic bearings

The three-level PWM rectifier with high reliability based on the three microcontrollers control

A control strategy of three-phase boost type PWM rectifier based on virtual flux

Advances of interior permanent magnet (IPM) wind generators

Comparison of different structures for variable speed constant frequency wind power generator

Accurate model for power turbine generators as recovery energy

Dual-buck full-bridge inverter

Stability analysis of doubly-fed wind power generation system based on phase-locked loop

Steady-state performance analysis of six-phase self-excited induction generator for renewable energy generation

A new control methodology of wind turbine generators for load frequency control of power system in isolated island

Dynamic performance analysis of a wind turbine generating system using a current-source thyristor inverter

Dynamic performance analysis of a hybrid wind turbine generator system

Analysis of wind turbine structural loads under grid fault

A control strategy for direct-drive permanent-magnet wind-power generator using back-to-back PWM converter

Development of vertical-axis wind turbine with asynchronous generator interconnected to the electric network

Improved control strategy of an active crowbar for directly-driven PM wind generation system under grid voltage dips

Modified DPC for DFIG based wind power generation under unbalanced grid-voltage

Direct-driven wind energy conversion system with multiple armature-winding

Research on the unit power factor control of directly-driven PM wind generator

Analysis of the by-pass resistance of an active crowbar for doubly-fed induction generator based wind turbines under grid faults

Development of wind turbine simulator for wind energy conversion systems based on permanent magnet synchronous motor

DC injection control for grid-connected inverters based on virtual capacitor concept

DFIG wind power generation systems during unbalanced network fault: Analysis and operation

An engineering design of a 2MW direct-drive permanent-magnet wind-power generation system

Control of a two-phase bi-directional interleaved converter for maximum power point tracking

Phase locked loop for electronically-interfaced converters in distributed utility network

The dynamic characteristics of an isolated self-excited induction generator driven by a wind turbine

Topologies and control of VSC-HVDC systems for grid connection of large-scale off-shore wind farms

Agent-based energy management and control of a grid-connected wind/solar hybrid power system

Control strategy of 600kW E-BOP for molten carbonate fuel cell generation system

Comparative analysis of PI decoupling control strategies with or without feed-forward in SRF for three-phase power supply

Performance analysis and improvement of a proton exchange membrane fuel cell using comprehensive intelligent control

One novel Variable-speed wind energy system based on PMSG and super sparse matrix converter

A new smooth scheme for power fluctuation using inverter of wind power generation with doubly fed induction generator

Design optimization and evaluation of different wind generator systems

Study on variable speed direct drive wind energy conversion system with doubly salient electro-magnetic generator

Direct stator current phase control strategy of doubly-fed induction generator

Modeling and control of doubly fed induction generator wind turbines by using Causal Ordering Graph during voltage dips

A novel five phase fault tolerant doubly salient electromagnetic generator for direct driven wind turbine

Electromagnetic-force study of permanent magnet about large permanent magnet generator in wind-power

A new type of control strategy of DFIG in wind power system based on SMC

The optimal power control of doubly-fed variable speed constant frequency (DFVSCF) wind power generator

Modeling and control of a wind-turbine-driven DFIG incorporating core saturation during grid voltage dips

Design of a doubly-fed reluctance machine for wind energy generation

Optimal design and comparison of different PM synchronous generator systems for wind turbines

Control of variable-speed permanent magnet synchronous generators wind generation system

Control of direct-prive permanent-magnet wind power system connected to grid

The design of inductance in AC side of grid-connected inverter in wind power generation

Study on the paralleling operation control of a household wind power generation system

Research on one-cycle-controlled grid-connected inverter application on direct-drive wind power system

Adaptive protection and control strategy for interfacing wind generators to distribution grids

Research on the control strategy of four-multiple grid connected converter for large-scale wind energy conversion system

Analysis of harmonic and circulating current for paralleling inverters in MW-level wind energy conversion system

Independent control of active and reactive power of the grid-connected inverter

Inverter control strategy for direct-drive permanent magnet wind generator under unbalance of three-phase source voltage

Design and optimization of proportional resonant controller for rotor current of a wind turbine driven DFIG

Studies of commercial converter in wound rotor brushless doubly-fed marine generator control system

High power snubberless IGBT converter for direct-drive wind power generation system

Cascaded single phase PFC rectifier pair for permanent magnet wind generation system

Short-term wind speed forecasting for wind farm based on empirical mode decomposition

Small signal stability analysis of large scale variable speed wind turbines integration

Research on the configuration and control methods of the non-AC grid connected wind power system with energy-storage units

Adaptive active filter for interfacing wind-power DGs to distribution systems

Maximum wind capture based on Fuzzy PD control strategy

An improved strategy of wind power generation expansion planning

Research on power flow algorithm for power system including wind farm

A new excitation regulating and harmonic eliminating equipment for fixed speed fixed pitch wind turbines

Offshore wind farm with dispersed wind turbines control and HVDC grid-connected control

Vectorial dynamic optimal power flow calculation including wind farms based on step-controlled primal-dual interior point method

A novel dual power flow wind power generation system

Grid integration of DFIG-based offshore wind farms with hybrid HVDC connection

Comparison of transient behaviors of wind turbines with DFIG considering the shaft flexible models

Design of wind turbine controller by using wind turbine codes

The impact of Nan’ao wind farm integration on power quality of Shantou Power Grid

Study of a novel buck-boost inverter for photovoltaic systems

Research of multi-power structure optimization for grid-connected photovoltaic system based on Markov decision-making model

Design and implementation of a novel MPPT controller based on sun tracking technology

DC/DC converter applied in the photovoltaic-inclined thermal collector hybrid systems for brackish water desalination

Curved surface renewable solar cell applied to near space airship energy system

Research on dynamic stability of hybrid wind/PV system based on Micro-Grid

Design and implementation of a solar array simulator

Design and control of a novel module integrated converter with power pulsation decoupling for photovoltaic system

Simulation and design of intelligent wind solar generation system based on EWB

Design and research on two-loop control strategy of PV grid-connected inverter with LCL filter

Energy management of multi-energy hybrid BIPV system

Experience on 10kW grid-connecting solar power station

Research on an improved active frequency drift method for the grid-connected anti-islanding detection

Test and evaluation of lighting system in high-frequency AC microgrids

Modelling and simulation of the microsources within a microgrid

MPPT control method of the seaflow energy generation by using Fuzzy controller in a boost converter

Fuel cell and battery hybrid supplied power system

Dynamic model of an FC- and UC-based IPT system for railway vehicle

A novel islanding detection method of distributed generator based on wavelet transform

Economic incentive mechanism of renewable energy generation

Model and control for supercapacitor-based energy storage system for metro vehicles

Push-pull forward three-level converter for high-voltage fuel cell applications

Experimental study on electrode potential drop in liquid metal magnetohydrodynamic generator

The research and application of the optimal operation based on improved genetic algorithm for small hydropower stations in ShaoGuan

Regenerative braking control strategy for fuel cell hybrid vehicles using fuzzy logic

A novel energy saving control system for elevator based on supercapacitor bank using fuzzy logic

Study on selftuning-weight EMAP model applied in collaborative operation of renewable power generation system

Economic analysis of EDLC/battery hybrid energy storage

Research of energy management system of distributed generation based on power forecasting

Analysis of novel rotating electromagnetic heater based on the concept of the third function of rotational motor

A new adaptive active frequency drift method for islanding detection of grid-connected inverters

Research on digital implementation of proportional-resonant controller based on a three-phase PV grid-connected system

A new method to optimize q-axis voltage for deep flux weakening control of IPM machines based on single current regulator

Key technologies of large and medium power electromechanical energy conversion under extreme operating conditions

Influence of transient current to PM-AC motor driven by BLDC mode

PM machine comparison used in vehicle with different on-board voltage level

Comparison of permanent magnet brushless motors designed for Automated Manual Transmission (AMT) systems

Comparative study of electromagnetic performance of alternative Halbach and conventional radially magnetized permanent magnet brushless motors

A wide range speed control method of compact high speed BLDCM using PLL approach

Researches on behavior of vibration in Axial flux Permanent Magnet Synchronous Motor

Performance analysis on Opposite-Rotation Dual Mechanical Ports PMSM

Key technology research of BLDCM for high performance driving system

Stator-permanent magnet brushless machines: Concepts, developments and applications

A switched-reluctance motor/generator for mild hybrid vehicles

Synthesis of dimensionless indexes for IPM machine in variable speed operations

Influence of eddy currents on resonance-based position estimation of switched reluctance drives

Comparative study of alternative permanent magnet linear oscillating actuators

Analysis of the magnetomotive force of a three-phase winding with concentrated coils and different symmetry features

The magnetic field calculation and analysis of an air-core compulsator

Comparison of outer-rotor stator-permanent-magnet brushless motor drives for electric vehicles

Characteristics comparison between SPMSM and IPMSM under high flux density condition by both experimental and analysis results

Influence of skew and cross-coupling on d- and q-axis inductances and flux-weakening performance of PM brushless AC machines

A novel and easy-realizing initial rotor position detection method and speedup algorithm for sensorless BLDC motor drives

Numerical magnetic field analysis and parameter computation of a PM synchronous generator

Reduction of harmonic iron losses in interior permanent magnet motors by optimization of rotor structures

Comparison of performance of a closed loop PMSM drive system with Modified Predictive Current and Hysteresis Controllers

Design of a fault tolerant permanent magnet machine for airplanes

Investigation of line start permanent magnet synchronous motors with interior-magnet rotors and surface-magnet rotors

Fundamental study on a novel Transverse Flux Permanent Magnet Linear Machine

Study of techniques for reducing the cogging torque in permanent magnet motors

Optimal combination of stator and rotor pole numbers in flux-switching PM brushless AC machines

The capacitor matching problem in the single-phase line-start permanent magnetic synchronous motor

Compound-structure permanent-magnet synchronous machine used for HEVs

Saliency ratio optimization in an IPM machine with fractional-slot concentrated windings

Drive system of single side linear induction motors

Novel position estimation for switched reluctance motor based on space vector of phase inductance

Analysis and design of a novel power converter for four phase switch reluctance motor based on double IPMS

Novel force ripple eduction method for a moving-magnet linear synchronous motor with a segmented stator

Novel linear flux-switching permanent magnet machines

Robot architecture for a contactless industrial pick-and-place machine

Analysis of forces in combined levitation-and-propulsion SLIM system

Optimal design and dynamic characteristic analysis of a new type electric actuator for high voltage circuit breaker

Reduction effect of suspension input power using rotor eccentricity in a bearingless motor

Hybrid excitation machines with powdered iron core for electrical traction drive applications

Torque ripple reduction in the flux reversal motor by rotor pole shaping and stator excitation

Flux-switching PM brushless machines with alternative stator and rotor pole combinations

An electric assist bicycle drive with automatic continuously variable transmission

Design of two-phase hybrid stepping motor driver with current closed-loop control based on PIC18F2331

Dynamic characteristics analysis of magnetic bearing for high speed machine based on field-circuit coupling method

Feedback linearization control for a hybrid magnet levitation system

Hybrid excitation machine with isolated magnetic paths

Analysis of the commutation currents for a sinusoidal BLDC motor

Cogging torque reduction of flux-switching permanent magnet machines without skewing

A new model of vector-controlled doubly-salient permanent magnet motor with skewed rotor

A new stator-flux orientation strategy for flux-switching permanent motor drive based on voltage space-vector

Basic characteristics of a 4kW permanent-magnet type bearingless slice motor for centrifugal pump system

Harmonic analysis and comparison of the back EMFs of four permanent magnet machine with different winding arrangements

Module of Permanent Magnet Brushless Motor based on voltage switch function

A 200 000 rpm, 2 kW slotless permanent magnet motor

Analyzing on structure parameters for low-speed permanent magnet synchronous generator

Halbach array magnet and its application to PM spherical motor

Exploring and modeling on constant speed control strategy of permanent magnet synchronous motor for direct drive system

Sensorless vector control system of permanent magnet synchronous motors based on adaptive and fuzzy control

A sensorless speed control of an IPMSM using the observers with the adaptive structure

Research on rotor harmonic copper losses of line-start REPMSM based on FEM

A study on the starting characteristics in single -phase line-start permanent magnet motor

The analyses and prediction of an highaccurate no linear inductance analysis formulation of six-phase ten-pole fault-tolerant permanent magnet machine

A comparative analysis of two kinds of poles for washing machine’s IPMSM with the same torque and output power

The study and modeling of multi-phase PMSM variety speed system with high fault-tolerant

Basic concept of an analytical calculation method and some test results for determination of constant of line start permanent magnet motor

Using mathematical method of torque simulation for reducing calculation time of permanent magnet spherical wheel motor

Study on optimization design of the main electromagnetic parameters of permanent magnet synchronous motor

The design of rotor and notch to improve the operation characteristics in spoke type BLDC motor

A study on the improvement of dynamic characteristics in Interior Permanent Magnet motor by rotor shape design

Investigation and comparison of inductance calculation methods in interior permanent magnet synchronous motors

A study on the reducing of cogging torque of IPMSM

A novel control method for reducing torque ripple in PMSM applied for Electric Power Steering

Design criteria and electromagnetic analysis of a high-speed permanent magnet synchronous machine

Performance analysis of permanent magnet machines considering magnetic losses based on analytical parameter estimation

Investigation on core loss according to stator shape in interior permanent magnet synchronous motor

Thermal analysis using equivalent thermal network in IPMSM

Speed control of PMSM based on energy-shaping and PWM signal transformation principle

Design and analysis on permanent-magnet BLDC motor for automatic door

The effect of dispersibility of permanent magnetic materials on performances of line start permanent magnet synchronous motors

Electromagnetic coupling analysis of uniform magnetic-filed permanent magnet dual mechanical port machine

Design of rotor position detecting circuit with band-pass filters in sensorless BLDC motor drives

Cogging torque reduction by combining teeth notching and rotor magnets skewing in PM BLDC with concentrated windings

Calculation of winding voltage of permanent magnet synchronous generator based on Tooth Flux Method

Analysis of flux control for the IPMSM used in the power generation

Design and magnetic field analysis of a dual-rotor permanent-magnet synchronous wind generator

Four switch three phase inverter fed PMSM DTC system with nonlinear perpendicular flux observer and sliding mode control

Analysis of the magnetic field of the six-phase disc PMSM and effect of air gap length on the air gap magnetic field

Magnet demagnetization observation or permanent magnet synchronous motor

Experimental research on new-type of Transverse Flux Permanent Magnet Machine for electric vehicle

Calculation of gig air-gap magnetic field in poly-phase multi-pole BLDC motor

The series structure dual-rotor PMSM design based on phase-shifting winding

Optimal design and experimental verification of a line-start permanent magnet synchronous motor

Analysis of the iron loss of line start permanent magnet synchronous motor using time-stepping finite element method

Design and analysis of double-stator permanent magnet brushless motor for hybrid electric vehicles

The effect of magnet thickness on maximum levitation force in surface permanent magnet synchronous bearingless motor

Research on the axial-radial flux compound-structure permanent-magnet synchronous machine (CSPMSM) used for HEV

Speed regulation of wider range for rare earth permanent magnet brushless DC motor

Analysis on fast reclosing of line start permanent magnet motor with time-stepping finite element method

Comparison and study of 6/5- and 12/10-pole permanent magnet flux-switching motors considering flux-weakening capability

Control of a BLDC motor for electromechanical cctuator

Pull out torque computation for line start permanent magnet motor

Low speed high torque PMSM design based on unequal teeth structure

Interior permanent magnet synchronous motor design for improving self-sensing performance at very low speed

Calculation and analysis of high-speed permanent magnetic generator unilateral magnetic force

Study on the permanent magnet reduction design in single-phase line-start permanent magnet motor for household appliance

Calculation on parameters of multi -segment PM motor with composite magnetic circuit in rotor based on 3D FEM

Optimal design of outer rotor permanent magnet machine using improved particle swarm optimization

Iron loss calculation of PM motor by coupling analysis between magnetic field simulator and control simulator

Design and optimization of Servo Permanent Magnetic Synchronous Motor

Study of dead-time compensation on direct torque control of ALA rotor motor

Dynamic modeling and control for a switched reluctance starter/generator system

Sensorless control of switched reluctance motor for three-phase full-bridge inverter drive

An adaptive low-ripple torque control of switched reluctance motor for small electric vehicle

Simple predictive delta-modulation current regulator for switched reluctance motor drive

Torque compensation for switched reluctance drives

Control mode conversion considering nonlinear inductance parameter in the single phase switched reluctance motor

Novel active boost power converter for SR drive

Novel passive boost power converter for SR drive with high demagnetization voltage

Basic characteristics of electric vehicle using 40kW switched reluctance motor

Fourier series and ANFIS-based modeling and prediction for switched reluctance motor

A design of transverse flux switched reluctance motors with permanent magnet shield

Design of a novel switched reluctance planar motor

SRM torque ripple minimization based on modified multi-level converter

Study for generating operation of three-phase fully-pitched winding switched reluctance machine

Maximization of starting torque of a three-phase 6/2 switched reluctance motor for super high speed drive

Direct torque control of switched reluctance motors

Research on switched reluctance double-rotor motor used for hybrid electric vehicle

Regenerative braking control strategies of switched reluctance machine for electric bicycle

A current control method of switched reluctance motors based on iterative learning control considering the mutual inductance

Mutual coupling and its effect on torque waveform of even number phase switched reluctance motor

The model of nonlinear radial force in switched reluctance motor based on radial basis function neuron network

Analytical design and modeling of transverse flux switched reluctance machine

Studies to decrease cogging force and pulsating thrust in the prototype linear permanent magnet Vernier motor

Experimental study on identification of the parameters on α-β axis of LIM by DC decay testing method

A study on the optimal barrier design for high efficiency of LSPM

Study on minimizing the detent force of PM linear brushless DC motors

A novel adaptive genetic algorithm applied to optimizing linear induction machines

Analysis and study thrust ripple of PMSLM

Analysis of detent force in a discontinuous primary type permanent magnet linear synchronous motor

Research on thrust ripples elimination technique for double sided PM linear motor

Electromagnetic analysis of a permanent magnet linear synchronous motor

Dynamic characteristic analysis of high speed long primary block feeding linear induction motor

Study and optimized design of stator core structure in single-sided linear induction motor

The suspension system design of Linear Induction Motor based on hybrid excitation principle

A novel traction and normal forces study for the linear induction motor

Performance calculation for double-sided linear induction motor with short secondary

Starting performance analysis of three-phase capacitor motor for beam pumping unit

Research and optimal design on hybrid excitation claw-pole alternator for automobile application

Architecture and principle of a novel coordinate structure hybrid excitation synchronous machine

A study on the design and analysis of Double Cylinder Motor

A novel SHEPWM scheme for reducing torque pulsation of dual three-phase induction motors

On hybrid excitation claw-pole synchronous generator with magnetic circuit series connection

A study of cooling magnet-wire of the brushless DC motor for car air conditioner

Research and development of the electric supercharger for minivehicles

Analysis on a novel doubly salient machine

Exploring suitable applications for doubly-fed asynchronous machines

Research on ultrasonic motor with orthogonal synchronization

Analysis the electromagnetic torque and magnetic field of the axial and tadial air gap hybrid magnet circuit multi-coupling motor

Analysis of permanent magnet type stepping motor with claw poles using electromagnetic field analysis

Design, fabrication and experiment of iron-core passive compulsator

Study on the structure and flux regulation performance of a novel hybrid excitation synchronous generator

Design and study of novel transverse flux permanent magnet synchronous motor

Optimization of asymmetric permanent magnetic synchronous motor for cogging torque minimization using finite element method

Research on a novel combined permanent magnet electrical machine

Analyze of dual-axle four quadrant transducer motor operation mode

The development of a new type of doubly-fed variable speed salient-pole generator and its control system

Research on a high energy utilization efficiency electromagnetic aircraft launcher with an ultracapacitor bank

Research on a visual CAD system of REPM DC coreless motor

Position controlling for RTWUSM with diameter 30mm based on DSP and DDS

Transient characteristics analysis for switching from starter to generator of doubly salient electro-magnet starter/generator

Superconducting inductive energy storage pulsed current generator for electromagnetic launcher

Power parameters matching design of dual mechanical ports electric machine with clutch applied in hybrid electric vehicle

Pulse magnetic traveling wave propulsion system simulation analysis for electromagnetic launcher

A brushless Permanent Magnet Dual Mechanical Port Machine for hybrid electric vehicle application

The structural and characteristic study on the novel parallel magnetic path hybrid excitation synchronous generator

Research on modeling and several other prospective problems of dual rotor machine

The principle and mathematic model of the Brushless Doubly-Fed Electrical Variable Transmission

The principle and harmonic analysis of a new BDFM with tooth harmonic wound rotor using as a generator

The study of bypass hybrid excitation synchronous motors with extended field-weakening capability

Research on control of ultrasonic motor based on virtual instrument

Direct power control of a permanent magnet linear generator in a free piston energy converter

3-D FEM analysis of a novel structure for axial-flux homopolar generators using a grain-oriented silicon steel stator core

Radial force characteristics of multi-consequent-pole bearingless motor

Efficiency improvement of a doubly salient-pole homopolar machine with powder iron core

Calculation of eddy current losses in a solid-rotor cage induction motor by finite element analysis

Reduction of the cogging in the linear synchronous motor with a claw-pole-structured mover

Cogging force analysis of tubular linear permanent magnet motors

Research for the diver of hybrid excitation switched reluctance motor

Development of electromagnetic linear actuators for micro robots

Self-sensing methods from MEMs to solar aircraft motors

Effect of magnetization on torque pulsation of the PM BLDC motor

The torque free phenomenon of ultrasonic motors

Design and implementation of an ASIC-based four-axis position servo system

Dynamic characteristics of thermoelastic actuators

Design of a novel piezoelectric inchworm actuator

Analysis of claw-pole machine using magnetic circuit method applying Fourier series

Analysis of a linear ultrasonic motor using numerical and analytic method

Design of motor driving 3-phase variac charging system for DNB High Voltage Power Supply

The research on performances of interior permanent magnet synchronous motor with different pole and slot combinations

Realization of super-low revs running about AC Servo motor

The application of gain scheduling PID and notch filter to AC servo system

Research ontTracking performance of digital two-loops position servo system

Coupled analysis of a 3-phase linear actuator

Design of electromagnetic force driving cctuator (EMFA) for molded case circuit breaker

Study on performances of novel electromagnetic drive micromanipulator

Study on control strategy of rotating actuator made by magnetically shape memory alloy

Finite element analysis of the uniformity of magnetic field for on-off Giant Magnetostrictive Actuators

Optimal design of novel spatial bending SMA actuator based on heat analysis

Calculation of equivalent circuit parameters of doubly fed induction generator based on magnetic field finite element analysis

Brushless traction PM machines using commercial drive technology, Part II: Comparative study of the motor configurations

Comparison of parasitic parameters extraction methods and equivalent circuits for a grounding model

Quasi-continuous high order sliding mode controller design for PMSM

SPWM modulation strategy study of AC/DC matrix converter with high frequency isolation

Novel design method of a multi-section transmission-line transformer using genetic algorithm techniques

Derivation of a novel state-space formulation of 2-D frequency transformation by LFT techniques

Brushless traction PM machines using commercial drive technology, Part I: Design methodology and motor design

An improved dynamic model for the simulation of three-phase induction motors with deep rotor bars

Kinetic model of Three Degree-of-Freedom traveling wave type ultrasonic motor

Modeling and simulation of tooth-belt-driven industry servo system

Analytical modeling of permanent magnets on a soft magnetic support for a suspension system

Modeling and performance evaluation of 2DOF spherical traveling-wave type ultrasonic motor

Modeling of photovoltaic power plants

Simulation of high pulse power circuit based on semiconductor switch RSD in SABER-Simulink Co-Simulation Environment and Experiment

Principle and simulation analysis of a novel structure magnetic gear

Hybrid modeling techniques for power electronics based on Petri Net

Research on electric mesh grid for seawater desalination based on capacitive deionization

Modeling of a novel quantum series resonant inverter

Dynamic modeling and nonlinear decoupled control of back-to-back voltage source converter

Build and validation of RTDS model for control and protection system testing of Lingbao BTB DC converter station

Study on the excitation condition of compensated pulsed alternators

Study on a double two-phase permanent motor drive system

Research on the voltage filter method for AC excited variable speed constant frequency generator

Investigation on a methodology to detect instantaneous reactive and harmonic currents in single-phase systems

Predictive current control of the VSC-HVDC system

The study of PWM methods in permanent magnet brushless DC motor speed control system

Expression of single traveling field wave of AC induction motors

Feedback linearization control in AC servo system

Stray loss analysis for magnetic shielding with lamination

Mechanism analysis of a novel four-phase rectify circuits

A modified direct torque control method of brushless DC motor based on hyper space vector modulation

A control strategy of direct driven permanent magnet synchronous generator for maximum power point tracking in wind turbine application

Influence of current waveform on rail-gun launching efficiency

Calculation and remedial strategy of radial force of switched reluctance motors with eccentricity

A new kernel-based clustering algorithm for the multi-machine equivalent of large power systems

Dynamic decoupling control of AC-DC hybrid magnetic bearing based on neural network inverse method

A sensorless initial rotor position estimation scheme and an Extended Kalman Filter observer for the direct torque controlled Permanent Magnet Synchronous Motor Drive

Principle of multi-time scale order reduction and its application in AC/DC hybrid power systems

Study on generator Hamiltonian control model based on dynamic theory

Analysis and design of a new type high-efficiency single-phase induction motor based on negative sequence magnetic field compensation

A novel control method based on wavelet neural networks for direct torque control in induction motor drives

Research of position sensorless control of PMSM based on high frequency signal injection

Harmonic detection for three-phase circuit based on the improved analog LMS algorithm

Research on a novel method to suppress neutral harmonic currents in three-phase four-wire power systems

Application research of maximum power point tracing controller based on adaptive control strategy in WECS

Parameters identification of twelve-phase synchronous generator based on Levenberg-Marquardt algorithm

Power system state estimation based on nonlinear programming

An indirect adaptive fuzzy speed controller for permanent magnet synchronous motor

A Fast Matlab toolbox for electrical machinery

Fault diagnosis approach of protective switching device based on support vector machines

Study on electromagnetic damp characteristics of permanent magnet synchronous generator

Study of excitation control strategies for AC excited generator

Study of the flux observer and its optimizing strategy for induction motor based on Extended Kalman Filter

Evaluationof Jiles-Atherton Hystersis model’s parameters using mix of simplex method and simulated annealing method

Study on fault-synchronizing current and electromagnetic torque of powerformer

Research on electromagnetic field characteristic of armature in the coil launcher

Modeling of flux-switching permanent magnet motor drives using transient field-circuit co-simulation method

Analysis of reluctance coil launcher performance using coupled field-circuit method

An improved magnetic property modeling for electrical steel sheets based on double-exciting type 2D measuring system

Calculation of railgun inductance gradient by 2-D finite element method

Modeling of potential transformers for the very fast transient simulation based on wideband scattering parameter measurements

A new modeling and simulation platform-Mworks for electrical machine based on modelica

An integrative modeling method and stability analysis of higher order switching converters

Measurement-based small signal modeling for the smart power IC

Thermal modeling of permanent magnet double-rotor machine

A large signal dynamic model for buck-cascaded Buck-Boost converter in universal-input PFC applications

Level set method for movement modeling in finite element analysis of electromechanical system

Model and experiment of giant magnetostrictive vibration sensor

Calculation of muti-power supplies short circuit based on distribution grid’s structure characteristics

Aircraft Power Distribution System large-signal modeling and control

Study of virtual ship power station based on Creator—Vega

Simulation of brushless doubly-fed generator base on hybrid reference frame model and tensor method

Three-phase transformer models for load flow calculations in power systems

Simulation and experiment verification of differential pressure sensor with magnetic fluid

Research on loss model and junction temperature of IGBT for electric vehicles using PSPICE

Analysis of single-phase induction motor by using circuit-coupled finite element method

A platform for inverter system research based on semi-physical simulation

Modeling and simulation of seven level inverter based on multi-carrier control

The building and analyzing of the fifth-order model of the synchronous generator in stand-alone infinite system

A dynamic model of electromagnetic relay including contact bounce

Three-dimensional numerical simulation on helical channel MHD thruster

A new equivalent circuit for the Brushless Doubly-Fed Machine

Effective simulation of stability of 3/12-phase synchronous generators with simultaneous ac and dc stator connections using MATLAB

Research on mathematical models and leakage reactances measurement of double-winding AC-DC generator

Simulation researches on temperature rise of a vacuum interrupter for high current applications

Model of the unit controlling and driving for RTWUSM based on MCM

Research on three-phase four-wire shunt active power filter for harmonic and reactive compensation

Analysis and design of PDM HF converter for mining local fanner

A study on the compensation capacitor in ballast track circuit

The estimation of pitch angle in pitch-controlled wind turbine

Electromagnetic analyzing of slotless evaporative cooling generator

Study of six-pole magnetic bearing

A 3-D SVPWM without medium vectors for 3-phase 3-wire 3-level rectifier

Application of three-phase current source converter in power battery testing system for electric vehicles

Performance of UPFC integrated with SMES for power systems controlling

Operational mechanism and characteristic analysis of directly driven wind turbine with complex structure and permanent magnet synchronous generator

Research on combined three-subsection permanent magnet model in the close magnetic circuit

Trajectory sensitivity analysis of influences of excitation system and governors on the dynamics of hydroelectric generating unit

Effects of inductor shape on the performance of axial flux inductor type superconducting motor

Cage rotor structure and its effect on magnetic field modulation of brushless doubly-fed machine

Effects of the inverter parameters on the eddy current losses in induction motor fed by PWM inverter

Harmonic analysis of the converter stations modulated by GIC in HVDC transmission lines

A new three-phase doubly salient electrical magnet generator for direct-driven wind power generation

Transmission planning considering reliability and economic performances in a deregulated environment

Applied research on controllable shunt reactor in Ultra-High Voltage ac transmission system

Electro-hydraulic braking control system based on electro-rheological technology

Modeling of a squirrel cage induction generator

Design optimization of tooth-harmonic brushless doubly-fed machine

Analysis and improve of electromagnet mechanism for integrated control and protective switching devices

A nonlinear PI controller of the brushless DC motor based on ant colony system

Relationship between multi-broken-bar position and faulty feature on squirrel cage induction motor

Study on the electromagnetic transient state in the new converter transformer based on coupled field-circuit method

A new hybrid model of transformer windings under very fast transient overvoltages

Design and analysis of a 10 kVA HTS transformer

Computer simulation model of transformer considering the influences of saturation

A modeling for transformer windings under Very Fast Transient Over-voltages

On-line monitoring and study of transformer DC bias

A new approach to identify inrush current based on generalized S-transform

Modeling and test of contactless transformer used in inductosyn

A novel comparator centered on the controlled saturable reactor

Application of phase-shifting reactor in harmonic suppression of the independent power supply system

Impact of saturation depth ratio of iron-core on the PMFCL

Development of a comprehensive power quality controller for power distribution system

The inverse design method of electromagnetic relay reaction system

Safety measurement of capacitive current for coal mine distribution network

Design and analysis of vacuum circuit breaker of paralleled breaks based on phase-control technology

Performance analysis of sliding transformer in contactless inductive power transfer system

A novel double-side average equivalent instantaneous inductance in nonsaturation zone based transformer protection

Fast time-domain algorithm of very fast transient in power transformer windings with wound-in-shields

Three phase transformer modeling with consideration the core effect

The mathematical model of the new converter transformer based on modified node method

A novel controllable reactor of transformer type

Effective electromagnetic field analysis using finite element method for high frequency transformers with litz-wire

Theoretical analysis and experiment research of high temperature superconducting air-core transformer

Modified integrated congruence transform and its application in computation of VFTO distribution in transformer windings

Study on surge current and over-voltage of electric locomotive transformer

Synthetical analysis of interleaving techniques’ effect on high-frequency transformer’s parameters

Experimental measurement and modeling of multi-winding high-voltage transformer

A novel direction protection principle for power transformer

The FE-based state space analysis for saturated transformer

The calculation of ampere force on electric power transformer under the short circuit situation

Improvement of main insulation structure for 110kV electric power transformer based on electric field analysis

A power-line energizing system for active power Electronic current transformer

Model test for harmonic characteristics of convertor transformer under Dc bias

A novel variable reactor with transformer and inverter control

Research on DC magnetic flux controllable reactor

Analysis of magnetic field with single controlled winding controllable reactor

Influence of switching conditions on Very Fast Transient Over-Voltage in 500kV Gas Insulated Substation

Operational characteristics of three-phase active superconducting fault current limiter in power system

Variable-phase contactless energy transfer desktop part I: Design

FEM analysis of non-contact feeding system for electric vehicle

Research of fast and non-impact on-load tap changing regulator for electrolytic process

An optimized sync control method for vacuum circuit breaker

A novel reactive power compensator based on current control

Design principle of a novel automatic tuning arc suppression coil system

An engineering practical method for simulation of anisotropic laminated core joints and validation

Development and application of flexible smart transducer based on TMS320F2812

The influence and countermeasure to transformer differential protection of CT saturation caused by external fault removal

Research on 1000kV series standard potential transformer

Calculation of leakage reactance for HTS transformer windings with magneto-motive force imbalance

2007 International Conference on Electrical Machines and Systems (ICEMS)

2005 International Conference on Electrical Machines and Systems

Sixth International Conference on Electrical Machines and Systems, 2003. ICEMS 2003.

ICEMS'2001. Proceedings of the Fifth International Conference on Electrical Machines and Systems (IEEE Cat. No.01EX501)

Design method of shading coil in electromagnetic mechanism of AC contactor based on FEA

Content Provider	IEEE Xplore Digital Library
Author	Xiuping Su Na Zhang Shuang Zhang Bingjun Gao
Copyright Year	2008
Description	Author affiliation: Hebei Univ. of Technol., Tianjin (Xiuping Su; Na Zhang; Shuang Zhang; Bingjun Gao)
Abstract	This paper presents a method to design the shading coil in electromagnetic mechanism of AC contactor using ANSOFT Maxwell 3D. Taking CJ20-25 AC contactor as an example, the FEA model of electromagnet in AC contactor was established, and the contour of magnetic field density of electromagnet was worked out. The influence on magnetic force was also studied when the width and thickness of cross area of shading coil, length of shading coil and the slot position were changed. The optimal dimension of the shading coil is given based on parametric study.
Starting Page	201
Ending Page	204
File Size	737070
Page Count	4
File Format	PDF
ISBN	9781424438266
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	2008-10-17
Publisher Place	China
Access Restriction	Subscribed
Rights Holder	IEEE Consumer Electronics Society(CES)
Subject Keyword	Design methodology Coils Iron Magnetic forces Electromagnetic forces Magnetic flux density Boundary conditions Electromagnetic modeling Springs Vibrations
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in