NDLI: Thermal Protection or Transformers Under Overload Conditions

Content Provider	IEEE Xplore Digital Library
Author	Montsinger, V. M. Camilli, G.
Copyright Year	1884
Abstract	The overloads recommended in the AIEE transformer subcommittee's report,¹ ``Emergency Operation of Transformers,'' are based on considerably higher transformer hot-spot temperatures for short-time operation than those given in and used to derive the emergency overloads recommended in the American Standard Guides for Operation of Transformers and Regulators C57.3. Overloads may be obtained in close agreement with the recommended emergency overload curves by the use of a relay which is controlled by a specially designed heating coil or by a specially designed relay with a conventional heating coil. Since a relay operates at about the same temperature irrespective of time to avoid too high hotspot temperature for ultimate conditions, the relay and heating coil must have such characteristics as to permit the transformer hot-spot temperature to reach considerably higher values for short times than for ultimate steady-state conditions. A detailed study of this problem has shown that this may be accomplished satisfactorily by the use of a lagged heating coil which has a relatively large time constant in comparison with that of the transformer winding or by the use of a heating coil, the time constant of which is about the same as that of the winding for operating a relay that is compensated for the changes in ambient temperature. This relay which has been developed can be set to perform three separate functions: control fans, give a warning signal, and sound an alarm or, if desired, trip the transformer off the circuit.
Starting Page	160
Ending Page	164
Page Count	5
File Size	2185524
File Format	PDF
ISSN	00963860
Volume Number	63
Issue Number	4
Language	English
Publisher	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Publisher Date	1944-04-01
Publisher Place	New York, U.S.A.
Access Restriction	Subscribed
Rights Holder	Institute of Electrical and Electronics Engineers, Inc. (IEEE)
Subject Keyword	Protection Transformers Relays Heating Coils Regulators Temperature control Steady-state Windings Fans
Content Type	Text
Resource Type	Article
Subject	Industrial and Manufacturing Engineering Control and Systems Engineering Electrical and Electronic Engineering

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Thermal protection of transformers under overload conditions

Thermal protection of transformers under overload conditions

Overload Protection of Silicone-Insulated Motors for Shipboard Use

Heating of Transformers Under Short-Circuit Conditions

Steady-State Characteristics of Carbon-Pile Voltage Regulators

Static Magnetic Exciter for Synchronous Alternators

Notes on Internal Heating of Stator Coils

Step Type Feeder voltage Regulators

Fundamental Theory of Inherent-Overheating Protection Under Running Overload Conditions

Thermal Protection or Transformers Under Overload Conditions

Similar Documents

Thermal protection of transformers under overload conditions

Thermal protection of transformers under overload conditions

Overload Protection of Silicone-Insulated Motors for Shipboard Use

Heating of Transformers Under Short-Circuit Conditions

Steady-State Characteristics of Carbon-Pile Voltage Regulators

Static Magnetic Exciter for Synchronous Alternators

Notes on Internal Heating of Stator Coils

Step Type Feeder voltage Regulators

Fundamental Theory of Inherent-Overheating Protection Under Running Overload Conditions

Thermal Protection or Transformers Under Overload Conditions