NDLI: Some Aspects of the Control for the Radial Distribution of Burden Material and Gas Flow in the Blast Furnace

Please wait, while we are loading the content...

Year: 2022, Volume: 15

Year: 2021, Volume: 15

Year: 2021, Volume: 14

Year: 2020, Volume: 14

Year: 2020, Volume: 13

Application of VMD and Hilbert Transform Algorithms on Detection of the Ripple Components of the DC Signal

Snapshot of Photovoltaics—February 2020

A New Method for Peer-to-Peer Energy Exchange in Distribution Grids

Dual Fuel Reaction Mechanism 2.0 including $NO_{x}$ Formation and Laminar Flame Speed Calculations Using Methane/Propane/n-Heptane Fuel Blends

Temporal Aspects in Emission Accounting—Case Study of Agriculture Sector

Wind Farm Yaw Optimization via Random Search Algorithm

Numerical Study of Heated Tube Arrays in the Laminar Free Convection Heat Transfer

Combined Control of DFIG-Based Wind Turbine and Battery Energy Storage System for Frequency Response in Microgrids

Condition Assessment of HV Bushings with Solid Insulation based on the SVM and the FDS Methods

Development of Energy Benchmarks for Office Buildings Using the National Energy Consumption Database

Estimation of Short Circuit Duration for the Assessment of Dynamic Effects in Distribution Substations with Flexible Conductors

Study on Global Industrialization and Industry Emission to Achieve the 2 °C Goal Based on MESSAGE Model and LMDI Approach

Biocomposite Fabrication from Enzymatically Treated Nanocellulosic Fibers and Recycled Polylactic Acid

Relation Between Mean Fluid Temperature and Outlet Temperature for Single U-Tube Boreholes

Serial Laboratory Effective Thermal Conductivity Measurements of Cohesive and Non-cohesive Soils for the Purpose of Shallow Geothermal Potential Mapping and Databases—Methodology and Testing Procedure Recommendations

Linear-Gompertz Model-Based Regression of Photovoltaic Power Generation by Satellite Imagery-Based Solar Irradiance

Analysis of the Dissolution of $CH_{4}/CO_{2}$-Mixtures into Liquid Water and the Subsequent Hydrate Formation via In Situ Raman Spectroscopy

A Linear Regression Thermal Displacement Lathe Spindle Model

Granger Causality Network Methods for Analyzing Cross-Border Electricity Trading between Greece, Italy, and Bulgaria

The Potential of Pressurised Water Reactors to Provide Flexible Response in Future Electricity Grids

Voltage Stability Margin Index Estimation Using a Hybrid Kernel Extreme Learning Machine Approach

A Li-Ion Battery Thermal Management System Combining a Heat Pipe and Thermoelectric Cooler

Biomass-Derived Graphitic Carbon Encapsulated $Fe/Fe_{3}$C Composite as an Anode Material for High-Performance Lithium Ion Batteries

Application of Specific Energy in Evaluation of Geological Conditions Ahead of Tunnel Face

A Lifetime-Enhancing Method for Directional Sensor Networks with a New Hybrid Energy-Consumption Pattern in Q-coverage Scenarios

Sustainable Solutions for Green Financing and Investment in Renewable Energy Projects

A Group Decision Framework for Renewable Energy Source Selection under Interval-Valued Probabilistic linguistic Term Set

Current Balancing Algorithm for Three-Phase Multilevel Current Source Inverters

Analyzing Similarities between the European Union Countries in Terms of the Structure and Volume of Energy Production from Renewable Energy Sources

Comparison of Saturated and Superheated Steam Plants for Waste-Heat Recovery of Dual-Fuel Marine Engines

A Layered Bidirectional Active Equalization Method for Retired Power Lithium-Ion Batteries for Energy Storage Applications

Three-Dimensional Thermal Modeling of Internal Shorting Process in a 20Ah Lithium-Ion Polymer Battery

A Solution of Implicit Model of Series-Parallel Photovoltaic Arrays by Using Deterministic and Metaheuristic Global Optimization Algorithms

Sensitivity Analysis and Optimization of Operating Parameters of an Oxyfuel Combustion Power Generation System Based on Single-Factor and Orthogonal Design Methods

A Fuzzy Logic Model for Power Transformer Faults' Severity Determination Based on Gas Level, Gas Rate, and Dissolved Gas Analysis Interpretation

Impact of Energy Storage Useful Life on Intelligent Microgrid Scheduling

Effects of a Combination Impeller on the Flow Field and External Performance of an Aero-Fuel Centrifugal Pump

Scientific Attention to Sustainability and SDGs: Meta-Analysis of Academic Papers

Speed Control of Segmented PMLSM Based on Improved SMC and Speed Compensation Model

Numerical Investigation on Instability Flow Behaviors of Liquid Oxygen in a Feeding Pipeline with a Five-Way Spherical Cavity

Simulation Study on the Electricity Data Streams Time Series Clustering

Collaborative Optimization of Multi-Energy Complementary Combined Cooling, Heating, and Power Systems Considering Schedulable Loads

Lithium-Ion Battery SOH Estimation Based on XGBoost Algorithm with Accuracy Correction

Low-Carbon Impact of Urban Rail Transit Based on Passenger Demand Forecast in Baoji

The Development Strategies and Technology Roadmap of Bioenergy for a Typical Region: A Case Study in the Beijing-Tianjin-Hebei Region in China

A Computer Vision Line-Tracking Algorithm for Automatic UAV Photovoltaic Plants Monitoring Applications

Analysis of Model-Based Tuning Method of PID Controller for Excitation Systems Considering Measurement Delay

Energy Efficiency of a Solar Wall with Transparent Insulation in Polish Climatic Conditions

One-Step or Two-Step Acid/Alkaline Pretreatments to Improve Enzymatic Hydrolysis and Sugar Recovery from Arundo Donax L.

Determination of the Required Power Response of Inverters to Provide Fast Frequency Support in Power Systems with Low Synchronous Inertia

Control the Voltage Instabilities of Distribution Lines using Capacitive Reactive Power

Combined Radiative Cooling and Solar Thermal Collection: Experimental Proof of Concept

An Experimental Study on the Actuator Line Method with Anisotropic Regularization Kernel

Time Domain Particle Swarm Optimization of PI Controllers for Bidirectional VSC HVDC Light System

Fabrication and Photovoltaic Properties of Organic Solar Cell Based on Zinc Phthalocyanine

Impact of the Type of Fertilization and the Addition of Glycerol on the Quality of Spring Rape Straw Pellets

Blockchain Technology for Information Security of the Energy Internet: Fundamentals, Features, Strategy and Application

An Induction Curve Model for Prediction of Power Output of Wind Turbines in Complex Conditions

Optimization Model of Key Equipment Maintenance Scheduling for an AC/DC Hybrid Transmission Network Based on Mixed Integer Linear Programming

Method for Estimating Harmonic Parameters Based on Measurement Data without Phase Angle

Automated Negotiation for Peer-to-Peer Electricity Trading in Local Energy Markets

Multi-State Household Appliance Identification Based on Convolutional Neural Networks and Clustering

Development of an Improved LMD Method for the Low-Frequency Elements Extraction from Turbine Noise Background

Optimal Coordination of Overcurrent Relays in Microgrids Considering a Non-Standard Characteristic

Effects of Organ-Pipe Chamber Geometry on the Frequency and Erosion Characteristics of the Self-Excited Cavitating Waterjet

The Effects of Capital and Energy Subsidies on the Optimal Design of Microgrid Systems

Technology Innovation System Analysis of Electricity Smart Metering in the European Union

Indoor Temperature Improvement and Energy-Saving Renovations in Rural Houses of China's Cold Region—A Case Study of Shandong Province

Non-Cooperative Indirect Energy Trading with Energy Storage Systems for Mitigation of Demand Response Participation Uncertainty

Expansionary Evolution Characteristics of Plastic Zone in Rock and Coal Mass Ahead of Excavation Face and the Mechanism of Coal and Gas Outburst

Experimental Study of Sand Particle Deposition on a Film-Cooled Turbine Blade at Different Gas Temperatures and Angles of Attack

Research on Down-Regulation Cost of Flexible Combined Heat Power Plants Participating in Real-Time Deep Down-Regulation Market

Do Real Output and Renewable Energy Consumption Affect $CO_{2}$ Emissions? Evidence for Selected BRICS Countries

Design and Modeling of an Integrated Flywheel Magnetic Suspension for Kinetic Energy Storage Systems

Evaluation and Improvement of the Sound Quality of a Diesel Engine Based on Tests and Simulations

Eggshell-Membrane-Derived Carbon Coated on $Li_{2}FeSiO_{4}$ Cathode Material for Li-Ion Batteries

Thermodynamic and Economic Analysis of Trigeneration System Comprising a Hierarchical Gas-Gas Engine for Production of Electricity, Heat and Cold

Optimal Price Based Demand Response of HVAC Systems in Commercial Buildings Considering Peak Load Reduction

Energy Harvesting by a Novel Substitution for Expansion Valves: Special Focus on City Gate Stations of High-Pressure Natural Gas Pipelines

Full-Bridge Active-Clamp Forward-Flyback Converter with an Integrated Transformer for High-Performance and Low Cost Low-Voltage DC Converter of Vehicle Applications

Effects of Jet Induced by String-type Plasma Actuator on Flow Around Three-Dimensional Bluff Body and Drag Force

Dynamic and Economic Investigation of a Solar Thermal-Driven Two-Bed Adsorption Chiller under Perth Climatic Conditions

Experimental and CFD Analysis of Impact of Surface Roughness on Hydrodynamic Performance of a Darrieus Hydro (DH) Turbine

Research on Safety Technology for High-Speed Interruption for Mining Flameproof Movable Substation

Local Heating Networks with Waste Heat Utilization: Low or Medium Temperature Supply?

Safe and Efficient Coal Mining Below the Goaf: A Case Study

Selective Hydrogenation of Phenol to Cyclohexanol over Ni/CNT in the Absence of External Hydrogen

A National Strategy Proposal for Improved Cooking Stove Adoption in Honduras: Energy Consumption and Cost-Benefit Analysis

The State of the Science and Technology in Deep Borehole Disposal of Nuclear Waste

Analytical Methods to Estimate the Thermal Transmittance of LSF Walls: Calculation Procedures Review and Accuracy Comparison

Surrogate Model with a Deep Neural Network to Evaluate Gas–Liquid Flow in a Horizontal Pipe

Thermal Characterization of Pinus radiata Wood Vacuum-Impregnated with Octadecane

Optimal Inventory Control Strategies for Deteriorating Items with a General Time-Varying Demand under Carbon Emission Regulations

Mitigation Life Cycle Assessment: Best Practices from LCA of Energy and Water Infrastructure That Incurs Impacts to Mitigate Harm

Catalytic Steam Reforming of Toluene: Understanding the Influence of the Main Reaction Parameters over a Reference Catalyst

Comparative Analysis of Small-Scale Integrated Solar ORC-Absorption Based Cogeneration Systems

Renewable Energy and EU 2020 Target for Energy Efficiency in the Czech Republic and Slovakia

New Criteria to Characterize the Waste Heat Recovery

Hydrodynamic Equilibrium Simulation and Shut-in Time Optimization for Hydraulically Fractured Shale Gas Wells

Strategic-Agent Equilibria in the Operation of Natural Gas and Power Markets

Thermal Diffusion in Fibrous Aerogel Blankets

A Wireless Power Transfer Based Implantable ECG Monitoring Device

Exploratory Research of $CO_{2}$, Noise and Metabolic Energy Expenditure in Lisbon Commuting

Heuristic Optimization of Culture Conditions for Stimulating Hyper-Accumulation of Biomass and Lipid in Golenkinia SDEC-16

Numerical Investigation on Bubble Distribution of a Multistage Centrifugal Pump Based on a Population Balance Model

Numerical Modeling of Bifacial PV String Performance: Perimeter Effect and Influence of Uniaxial Solar Trackers

Solar Energy Technology for Northern Cyprus: Assessment, Statistical Analysis, and Feasibility Study

Effect of Inlet Compound Angle of Backward Injection Film Cooling Hole

Nonuniform Heat Transfer Model and Performance of Molten Salt Cavity Receiver

Stability of Li-LSX Zeolite in the Catalytic Pyrolysis of Non-Treated and Acid Pre-Treated Isochrysis sp. Microalgae

Floating Performance of a Composite Bucket Foundation with an Offshore Wind Tower during Transportation

Limitations and Characterization of Energy Storage Devices for Harvesting Applications

Geographical Potential of Solar Thermochemical Jet Fuel Production

Quantification of the Energy Storage Contribution to Security of Supply through the F-Factor Methodology

Experiments and Modeling for Flexible Biogas Production by Co-Digestion of Food Waste and Sewage Sludge

Experimental Investigation on Time-Frequency Characteristics of Microseismic Signals in the Damage Evolution Process of Coal and Rock

Effects of Pig Manure and Corn Straw Generated Biogas and Methane Enriched Biogas on Performance and Emission Characteristics of Dual Fuel Diesel Engines

The Performance of the BTB-VSC for Active Power Balancing, Reactive Power Compensation and Current Harmonic Filtering in the Interconnected Systems

Causality Relationship Between Electricity Supply and Economic Growth: Evidence from Pakistan

Effect of Injection Strategies in Diesel/NG Direct-Injection Engines on the Combustion Process and Emissions under Low-Load Operating Conditions

Evaluation of Temporal Complexity Reduction Techniques Applied to Storage Expansion Planning in Power System Models

Parameters Affecting RDF-Based Pellet Quality

A Method for the Optimization of Daily Activity Chains Including Electric Vehicles

Control of a Modular Multilevel Matrix Converter for Unified Power Flow Controller Applications

Methodology of Excavator System Energy Flow-Down

Energetic Map Data Imputation: A Machine Learning Approach

Experiments and Simulation on a Late-Model Wind-Motor Hybrid Pumping Unit

Energy and Exergy Analysis of a Flat-Plate Solar Air Heater Artificially Roughened and Coated with a Novel Solar Selective Coating

Possibility of Calcium Oxide from Natural Limestone Including Impurities for Chemical Heat Pump

Design and Implementation of a Wireless Charging-Based Cardiac Monitoring System Focused on Temperature Reduction and Robust Power Transfer Efficiency

Power Generation from Concentration Gradient by Reverse Electrodialysis in Anisotropic Nanoporous Anodic Aluminum Oxide Membranes

Open Circuit Performance of Axial Air Gap Flux Switching Permanent Magnet Synchronous Machine for Wind Energy Conversion: Modeling and Experimental Study

Optimal Design and Comparison of High-Frequency Resonant and Non-Resonant Rotary Transformers

Exergy as Criteria for Efficient Energy Systems—A Spatially Resolved Comparison of the Current Exergy Consumption, the Current Useful Exergy Demand and Renewable Exergy Potential

Regenerative Braking for Energy Recovering in Diesel-Electric Freight Trains: A Technical and Economic Evaluation

Wavelet Energy Fuzzy Neural Network-Based Fault Protection System for Microgrid

A Cloud-Based In-Field Fleet Coordination System for Multiple Operations

A Multivariate Statistics-Based Approach for Detecting Diesel Engine Faults with Weak Signatures

An Interval-Arithmetic-Based Approach to the Parametric Identification of the Single-Diode Model of Photovoltaic Generators

Environmental Impact Assessments of Integrated Food and Non-Food Production Systems in Italy and Denmark

MPPT of a Photovoltaic Panels Array with Partial Shading Using the IPSM with Implementation Both in Simulation as in Hardware

Optimization of Pump Turbine Closing Operation to Minimize Water Hammer and Pulsating Pressures During Load Rejection

A Criterion of Heat Transfer Deterioration for Supercritical Organic Fluids Flowing Upward and Its Heat Transfer Correlation

Two Phase Anaerobic Digestion System of Municipal Solid Waste by Utilizing Microaeration and Granular Activated Carbon

Optimization and Extended Applicability of Simplified Slug Flow Model for Liquid-Gas Flow in Horizontal and Near Horizontal Pipes

Determination of the Differential Capacity of Lithium-Ion Batteries by the Deconvolution of Electrochemical Impedance Spectra

Characterization of Fast Pyrolysis Bio-Oil from Hardwood and Softwood Lignin

Paleoenvironment and Organic Matter Accumulation of the Upper Ordovician-Lower Silurian, in Upper Yangtze Region, South China: Constraints from Multiple Geochemical Proxies

Multi-Disciplinary Optimization Design of Axial-Flow Pump Impellers Based on the Approximation Model

Composite Sinusoidal Waveform Generated by Direct Digital Synthesis for Healthy Charging of Lithium-Ion Batteries

Thermal Degradation Kinetics and FT-IR Analysis on the Pyrolysis of Pinus pseudostrobus, Pinus leiophylla and Pinus montezumae as Forest Waste in Western Mexico

Solving the Cold-Start Problem in Short-Term Load Forecasting Using Tree-Based Methods

Development of a Bio-Solar House Model for Egyptian Conditions

Experimental Investigations Conducted for the Characteristic Study of OM29 Phase Change Material and Its Incorporation in Photovoltaic Panel

Study on the Effectiveness of Sulfate-Reducing Bacteria Combined with Coal Gangue in Repairing Acid Mine Drainage Containing Fe and Mn

Establishment of Key Performance Indicators for Green Building Operations Monitoring—An Application to China Case Study

Some Aspects of the Control for the Radial Distribution of Burden Material and Gas Flow in the Blast Furnace

Low Temperature District Heating: An Expert Opinion Survey

Aerodynamic Analysis of a Two-Bladed Vertical-Axis Wind Turbine Using a Coupled Unsteady RANS and Actuator Line Model

Product Distribution and Characteristics of Pyrolyzing Microalgae (Nannochloropsis oculata), Cotton Gin Trash, and Cattle Manure as a Cobiomass

Daily Photovoltaic Power Prediction Enhanced by Hybrid GWO-MLP, ALO-MLP and WOA-MLP Models Using Meteorological Information

Modeling the Impact of Modified Inertia Coefficient (H) due to ESS in Power System Frequency Response Analysis

Performance Analysis of a Stirling Engine Hybrid Power System

The Dynamic Impacts of Oil Price on China's Natural Gas Consumption under the Change of Global Oil Market Patterns: An Analysis from the Perspective of Total Consumption and Structure

An Optimal Design of an Electromagnetic Actuation System towards a Large Homogeneous Magnetic Field and Accessible Workspace for Magnetic Manipulation

Energy Saving Potential of Industrial Solar Collectors in Southern Regions of Russia: The Case of Krasnodar Region

Performance of a Solar Thermoelectric Power-Harvesting Device Based on an All-Glass Solar Heat Transfer Pipe and Gravity-Assisted Heat Pipe with Recycling Air Cooling and Water Cooling Circuits

Energy, Exergy and Economic Analyses of a Combined Heating and Power System with Turbine-Driving Fans and Pumps in Northeast China

GaN-based Matrix Converter Design with Output Filters for Motor Friendly Drive System

An Investigation of an Adaptive Neuro-Fuzzy Inference System to Predict the Relationship among Energy Intensity, Globalization, and Financial Development in Major ASEAN Economies

Studying the Role of System Aggregation in Energy Targeting: A Case Study of a Swedish Oil Refinery

IEC 61850-Based Centralized Busbar Differential Protection with Data Desynchronization Compensation

How to Select the Optimal Electrochemical Energy Storage Planning Program? A Hybrid MCDM Method

Practical Considerations for Designing Reliable DC/DC Converters, Applied to a BIPV Case

Influence of $C_{3}N_{4}$ Precursors on Photoelectrochemical Behavior of $TiO_{2}/C_{3}N_{4}$ Photoanode for Solar Water Oxidation

An Improved LightGBM Algorithm for Online Fault Detection of Wind Turbine Gearboxes

Simulation-Based Methodology for Determining the Dynamic Strength of Tire Inflation Restraining Devices

The Economic Feasibility of Floating Offshore Wave Energy Farms in the North of Spain

Hydrodynamic Investigation of a Dual-Cylindrical OWC Wave Energy Converter Integrated into a Fixed Caisson Breakwater

Development of Scenarios for a Multi-Model System Analysis Based on the Example of a Cellular Energy System

Study of the Antioxidant Power of the Waste Oil from Palm Oil Bleaching Clay

Optimization of Continuous Solid-State Distillation Process for Cost-Effective Bioethanol Production

A Method for Efficiency Determination of Permanent Magnet Synchronous Motor

The Impact of Policy and Technology Parameters on the Economics of Microgrids for Rural Electrification: A Case Study of Remote Communities in Bolivia

Weather Risk Management in Energy Sector: The Polish Case

Automatic Coal and Gangue Segmentation Using U-Net Based Fully Convolutional Networks

Modelling Heat Pumps with Variable EER and COP in EnergyPlus: A Case Study Applied to Ground Source and Heat Recovery Heat Pump Systems

Nanomaterials Utilization in Biomass for Biofuel and Bioenergy Production

Hydrate—A Mysterious Phase or Just Misunderstood?

Numerical Analysis of Heat Transfer Mechanism of Thermal Runaway Propagation for Cylindrical Lithium-ion Cells in Battery Module

Accuracy Analysis of DNN-Based Pose-Categorization Model and Activity-Decision Algorithm

Performance Analysis of an Electromagnetically Coupled Piezoelectric Energy Scavenger

Construction Diversion Risk Assessment for Hydropower Development on Sediment-Rich Rivers

Numerical Study on the Elastic Deformation and the Stress Field of Brittle Rocks under Harmonic Dynamic Load

New Dispatching Paradigm in Power Systems Including EV Charging Stations and Dispersed Generation: A Real Test Case

A Low EMI DC-DC Buck Converter with a Triangular Spread-Spectrum Mechanism

Real-time Energy Management Strategy for Oil-Electric-Liquid Hybrid System based on Lowest Instantaneous Energy Consumption Cost

Assessment of Sectoral Greenhouse Gas Emission Reduction Potentials for 2030

Rhodotorula toruloides Single Cell Oil Production Using Eucalyptus urograndis Hemicellulose Hydrolysate as a Carbon Source

A New Lithium-Ion Battery SOH Estimation Method Based on an Indirect Enhanced Health Indicator and Support Vector Regression in PHMs

Production and Characterization of Biodiesel Derived from a Novel Source Koelreuteria paniculata Seed Oil

Decomposition Analysis of the Carbon Emissions of the Manufacturing and Industrial Sector in Thailand

Synthesis of Furfuryl Alcohol from Furfural: A Comparison between Batch and Continuous Flow Reactors

Analysis of the Influencing Factors on Oil Removal Efficiency in Large-Scale Flotation Tanks: Experimental Observation and Numerical Simulation

Inter-turn Fault Identification of Surface-Mounted Permanent Magnet Synchronous Motor Based on Inverter Harmonics

Pulsating Flow of CNT–Water Nanofluid Mixed Convection in a Vented Trapezoidal Cavity with an Inner Conductive T-Shaped Object and Magnetic Field Effects

A Wind Electric-Driven Combined Heating, Cooling, and Electricity System for an Office Building in Two Italian Cities

The Relation of Microstructure, Materials Properties and Impedance of SOFC Electrodes: A Case Study of Ni/GDC Anodes

Effects of Temperature on the Flow and Heat Transfer in Gel Fuels: A Numerical Study

Natural Dyes from Mortiño (Vaccinium floribundum) as Sensitizers in Solar Cells

Development of a Reduced Order Model for Fuel Burnup Analysis

A New Method of Lithology Classification Based on Convolutional Neural Network Algorithm by Utilizing Drilling String Vibration Data

Computational Modeling and Empirical Analysis of a Biomass-Powered Drinking Water Pasteurization Technology

Comparison of the Evaporation and Condensation Heat Transfer Coefficients on the External Surface of Tubes in the Annulus of a Tube-in-Tube Heat Exchanger

Modeling and Experimental Study on Motion States of Laboratory-Scale Bottom Hole Assembly in Horizontal Wells

Small-Signal Stability Analysis of Photovoltaic-Hydro Integrated Systems on Ultra-Low Frequency Oscillation

Sensitivity Analysis of an Implanted Antenna within Surrounding Biological Environment

Experimental Investigation on the High-frequency Pressure Oscillation Characteristics of a Combustion Process in a DI Diesel Engine

Application of Advanced Vibration Monitoring Systems and Long Short-Term Memory Networks for Brushless DC Motor Stator Fault Monitoring and Classification

Evaluation of the Potential of Biomass to Energy in Portugal—Conclusions from the CONVERTE Project

Hot Blade Shape Reconstruction Considering Variable Stiffness and Unbalanced Load in a Steam Turbine

Ancillary Services Market Design in Distribution Networks: Review and Identification of Barriers

Turbine Characteristics of Wave Energy Conversion Device for Extraction Power Using Breaking Waves

Benchmarking a Sustainable Energy Engineering Undergraduate Degree against Curriculum Frameworks and Pedagogy Standards from Industry and Academia

Vortex-Induced Vibration Characteristics of a PTC Cylinder with a Free Surface Effect

Temperature Measurements on a Solar and Low Enthalpy Geothermal Open-Air Asphalt Surface Platform in a Cold Climate Region

Modular Battery Charger for Light Electric Vehicles

Year: 2019, Volume: 13

Year: 2019, Volume: 12

Year: 2018, Volume: 12

Year: 2018, Volume: 11

Year: 2018, Volume: 10

Year: 2017, Volume: 11

Year: 2017, Volume: 10

Year: 2016, Volume: 10

Year: 2016, Volume: 9

Year: 2015, Volume: 9

Year: 2015, Volume: 8

Year: 2014, Volume: 8

Year: 2014, Volume: 7

Year: 2013, Volume: 7

Year: 2013, Volume: 6

Year: 2012, Volume: 5

Some Aspects of the Control for the Radial Distribution of Burden Material and Gas Flow in the Blast Furnace

Content Provider	Directory of Open Access Journals (DOAJ)
Author	Bartłomiej Jura Anatoliy Golovchenko Roman Dychkovskyi Yuliya Pazynich Cáceres Cabana Edgar Natalia Howaniec Adam Smolinski
Abstract	The paper presents an experimental study on the formation process of burden surface texture on the blast furnace throat and its influence on the radial distribution of gas flow. The study was performed with the application of blast furnaces equipped with a bell-type charging device using radio-isotope means for the control of burden surface texture (profile) and burden surface level, i.e., gamma locators for burden surface texture. The study was carried out under the conditions of an operating blast furnace in an iron and steel plant using a unique GEOTAPS system for automated control of geometric and temperature parameters of burden material surface on the blast furnace throat. The influence of the surface texture on the gas flow distribution was also investigated. The possibility of a self-stabilization effect for burden surface texture and gas flow in an operating blast furnace under suitable conditions was experimentally proven. As a result of the experimental study performed, four ways of energy-saving technology implementation were determined for the control of blast furnace melting based on the data on the burden surface texture and previously unknown regularities of surface layer formation of burden material on the throat of an operating blast furnace with a bell-type charging device. The main idea of the paper is the development of automated control for the radial distribution of burden material and gas flow using actual or predicted surface texture parameters as important intermediate factors that both describe the process and have a significant simultaneous influence on it.
e-ISSN	19961073
DOI	10.3390/en13040923
Journal	Energies
Issue Number	4
Volume Number	13
Language	English
Publisher	MDPI AG
Publisher Date	2020-02-01
Publisher Place	Switzerland
Access Restriction	Open
Subject Keyword	Technology Gas Flow in Blast Furnace Energy Saving Process Efficiency
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in