NDLI: Design and Implementation of Finite Time Nonsingular Fast Terminal Sliding Mode Control for a Novel High Step-Up DC-DC Converter

Please wait, while we are loading the content...

Year: 2022, Volume: 15

Year: 2021, Volume: 15

Year: 2021, Volume: 14

Year: 2020, Volume: 14

Year: 2020, Volume: 13

Year: 2019, Volume: 13

Year: 2019, Volume: 12

Effect of Oil Regeneration on Improving Paper Conditions in a Distribution Transformer

Application of Acoustic Emission Technique to the Evaluation of Coal Seam Hydraulic Flushing Effect

Five-Level T-type Cascade Converter for Rooftop Grid-Connected Photovoltaic Systems

How Big Is an Error in the Analytical Calculation of Annular Fin Efficiency?

Data Driven Natural Gas Spot Price Prediction Models Using Machine Learning Methods

$Nafion^{®}$ Tubing Humidification System for Polymer Electrolyte Membrane Fuel Cells

Supercapacitor Storage Sizing Analysis for a Series Hybrid Vehicle

Evaluation of Excavation-Damaged Zone around Underground Tunnels by Theoretical Calculation and Field Test Methods

Experimental Research on the Energy Efficiency of a Parallel Hybrid Drive for an Inland Ship

Large-Scale Experiments to Improve Monopile Scour Protection Design Adapted to Climate Change—The PROTEUS Project

Experimental Study of the Effect of Splitter Blades on the Performance Characteristics of Francis Turbines

Design for Reliability: The Case of Fractional-Slot Surface Permanent-Magnet Machines

A General Parameter Identification Procedure Used for the Comparative Study of Supercapacitors Models

Optimization of a Power Line Communication System to Manage Electric Vehicle Charging Stations in a Smart Grid

A Review of Software Tools to Study the Energetic Potential of Tidal Currents

Dynamically Coupled Operation of Two-Tank Indirect TES and Steam Generation System

Remaining Useful Life Prediction of Lithium-Ion Batteries Based on Wiener Processes with Considering the Relaxation Effect

Power Generation from a Hybrid Generator (TENG-EMG) Run by a Thermomagnetic Engine Harnessing Low Temperature Waste Heat

Active Control of Drive Chain Torsional Vibration for DFIG-Based Wind Turbine

Combination Optimization Configuration Method of Capacitance and Resistance Devices for Suppressing DC Bias in Transformers

Elimination of Common Mode Voltage in Three-To-Six-Phase Matrix Converter

Virtual Prototyping of Axial Piston Machines: Numerical Method and Experimental Validation

Fault-Tolerant Control Strategies and Capability without Redundant Sub-Modules in Modular Multilevel Converters

ANFTS Mode Control for an Electronically Controlled Hydraulic Power Steering System on a Permanent Magnet Slip Clutch

Sensors Fault Diagnosis and Active Fault-Tolerant Control for PMSM Drive Systems Based on a Composite Sliding Mode Observer

Investigation of Thermal Comfort Responses with Fuzzy Logic

Column Leaching Tests to Valorize a Solid Waste from the Decommissioning of Coal-Fired Power Plants

Proposal of a Novel Semi-Submersible Floating Wind Turbine Platform Composed of Inclined Columns and Multi-Segmented Mooring Lines

Multi-Criteria Decision-Making under mHF ELECTRE-I and HmF ELECTRE-I

Is an Incentive Policy for Energy Efficient Products Effective for Air Purifiers? The Case of South Korea

Investigation of Effective Thermal Conductivity for Ordered and Randomly Packed Bed with Thermal Resistance Network Method

Evaluation of the Use of Energy in the Production of Sweet Sorghum (Sorghum Bicolor (L.) Moench) under Different Production Systems

Development of a Passive and Active Technology Package Standard and Database for Application to Zero Energy Buildings in South Korea

Magnetic Field during Wireless Charging in an Electric Vehicle According to Standard SAE J2954

Turning Filling Material into Proppant for Coalbed Methane in Poland—Crush Test Results

Investigation of Ecosystem Services and Circular Economy Interactions under an Inter-organizational Framework

Microalgal-Based Carbon Sequestration by Converting LNG-Fired Waste $CO_{2}$ into Red Gold Astaxanthin: The Potential Applicability

A Methodology for Dependability Evaluation of Smart Grids

A Demand Response Approach to Scheduling Constrained Load Shifting

How Does Information and Communication Technology Capital Affect Productivity in the Energy Sector? New Evidence from 14 Countries, Considering the Transition to Renewable Energy Systems

Biological $CO_{2}$-Methanation: An Approach to Standardization

Effect of Airtightness on Thermal Loads in Legacy Low-Income Housing

Optimal Operational Strategy for Power Producers in Korea Considering Renewable Portfolio Standards and Emissions Trading Schemes

Current Policy and Technology for Tidal Current Energy in Korea

Image Recognition of Coal and Coal Gangue Using a Convolutional Neural Network and Transfer Learning

Sugarcane Bagasse Hydrolysis Enhancement by Microwave-Assisted Sulfolane Pretreatment

An Alterable Structure Power Router with General AC and DC Port for Microgrid Applications

Optimal Operational Scheduling of Reconfigurable Multi-Microgrids Considering Energy Storage Systems

Drivers and Barriers to Industrial Energy Efficiency in Textile Industries of Bangladesh

A Day-ahead and Day-in Decision Model Considering the Uncertainty of Multiple Kinds of Demand Response

Evaluation of Supply–Demand Adaptation of Photovoltaic–Wind Hybrid Plants Integrated into an Urban Environment

Quantitative Analysis of Consumer Preferences of Windows Set in South Korea: The Role of Energy Efficiency Levels

Q-Learning-Based Operation Strategy for Community Battery Energy Storage System (CBESS) in Microgrid System

All-In-One Induction Heating Using Dual Magnetic Couplings

Synthesis of Novel Ethoxylated Quaternary Ammonium Gemini Surfactants for Enhanced Oil Recovery Application

Design and Simulation of a 1 DOF Planetary Speed Increaser for Counter-Rotating Wind Turbines with Counter-Rotating Electric Generators

Analysis of Wind-Turbine Main Bearing Loads Due to Constant Yaw Misalignments over a 20 Years Timespan

A Novel Nonintrusive Load Monitoring Approach based on Linear-Chain Conditional Random Fields

Investigation on the Performance of a Compact Three-Fluid Combined Membrane Contactor for Dehumidification in Electric Vehicles

Improvement of Organosolv Fractionation Performance for Rice Husk through a Low Acid-Catalyzation

Numerical Investigation into the Effect of Sound Speed in Attached Cavitation on Hydrofoil Modes of Vibration

A Time-Efficient and Accurate Open Circuit Voltage Estimation Method for Lithium-Ion Batteries

Hybrid AC/DC Microgrid Planning with Optimal Placement of DC Feeders

Modified Power Curves for Prediction of Power Output of Wind Farms

Dynamic Response of a Digital Displacement Motor Operating with Various Displacement Strategies

Research on Improved Auto-Tuning of a PID Controller Based on Phase Angle Margin

Decision Making using Logical Decision Tree and Binary Decision Diagrams: A Real Case Study of Wind Turbine Manufacturing

A Multi-Objective Optimization Model for a Non-Traditional Energy System in Beijing under Climate Change Conditions

Hybrid TOA Trilateration Algorithm Based on Line Intersection and Comparison Approach of Intersection Distances

Effects of the Heat Transfer Fluid Selection on the Efficiency of a Hybrid Concentrated Photovoltaic and Thermal Collector

DEA Non-Radial Approach for Resource Allocation and Energy Usage to Enhance Corporate Sustainability in Japanese Manufacturing Industries

Quantitative Inversion of Fixed Carbon Content in Coal Gangue by Thermal Infrared Spectral Data

The Study of Flow Characteristics During the Decomposition Process in Hydrate-Bearing Porous Media Using Magnetic Resonance Imaging

Low-Level Control of Hybrid Hydromechanical Transmissions for Heavy Mobile Working Machines

Aggregation of Type-4 Large Wind Farms Based on Admittance Model Order Reduction

Experimental Evaluation of a Control System Based on a Dual-DSP Architecture for a Unified Power Quality Conditioner

Wave Power Extraction from a Dual Oscillating-Water- Column System Composed of Heave-Only and Onshore Units

Review and Mapping of Parameters for the Early Stage Design of Adaptive Building Technologies through Life Cycle Assessment Tools

An Analytic Method for Power System Fault Diagnosis Employing Topology Description

Experimental Research of High-Temperature and High-Pressure Water Jet Characteristics in ICRC Engine Relevant Conditions

Design and Implementation of Finite Time Nonsingular Fast Terminal Sliding Mode Control for a Novel High Step-Up DC-DC Converter

Long-Term Monitoring of Sensible Thermal Storage in an Extremely Cold Region

Performance Prediction and Validation of a Small-Capacity Twisted Savonius Wind Turbine

Energy Storage Sizing Strategy for Grid-Tied PV Plants under Power Clipping Limitations

Impact of Combined Demand-Response and Wind Power Plant Participation in Frequency Control for Multi-Area Power Systems

Numerical Investigation of the Effect of Sudden Expansion Ratio of Solid Fuel Ramjet Combustor with Swirling Turbulent Reacting Flow

Microhardness of Coal from Near-Fault Zones in Coal Seams Threatened with Gas-Geodynamic Phenomena, Upper Silesian Coal Basin, Poland

Analysis of the Temperature Characteristics of Three-Phase Coaxial Superconducting Power Cable according to a Liquid Nitrogen Circulation Method for Real-Grid Application in Korea

Coal Mine Inclined Shaft Advanced Detection Method and Physical Model Test Based on Shield Cutterhead Moving Array Electrodes

A Restarting Strategy for Back-EMF-Based Sensorless Permanent Magnet Synchronous Machine Drive

A High-Performance Stochastic Fractal Search Algorithm for Optimal Generation Dispatch Problem

Efficient Advertiser Discovery in Bluetooth Low Energy Devices

Cogging Torque Reduction and Offset of Dual-Rotor Interior Permanent Magnet Motor in Electric Vehicle Traction Platforms

Optimizing the Regulation of Aggregated Thermostatically Controlled Loads by Jointly Considering Consumer Comfort and Tracking Error

Analysis and Optimization of Exergy Flows inside a Transcritical $CO_{2}$ Ejector for Refrigeration, Air Conditioning and Heat Pump Cycles

A Comparative Study of Energy Storage Systems and Active Front Ends for Networks of Two Electrified RTG Cranes

High Efficiency Solar Power Generation with Improved Discontinuous Pulse Width Modulation (DPWM) Overmodulation Algorithms

A Time-Series Data Analysis Methodology for Effective Monitoring of Partially Shaded Photovoltaic Systems

A Review of Criticisms of Integrated Assessment Models and Proposed Approaches to Address These, through the Lens of BECCS

An Evaluation Method of Brittleness Characteristics of Shale Based on the Unloading Experiment

Design and Simulation of an Energy Homeostaticity System for Electric and Thermal Power Management in a Building with Smart Microgrid

The Influence of Formulation Ratio and Emulsifying Settings on Tri-Fuel (Diesel–Ethanol–Biodiesel) Emulsion Properties

Experimental Observation of Natural Convection Heat Transfer Performance of a Rectangular Thermosyphon

Business Model Changes in District Heating: The Impact of the Technology Shift from the Third to the Fourth Generation

Robust Control Method for DC Microgrids and Energy Routers to Improve Voltage Stability in Energy Internet

Day-Ahead Photovoltaic Forecasting: A Comparison of the Most Effective Techniques

Dynamic Crack Initiation Toughness of Shale under Impact Loading

Multi-Functional Model Predictive Control with Mutual Influence Elimination for Three-Phase AC/DC Converters in Energy Conversion

Target Setting Outlook for New Residential Building Energy Efficiency Promotion in China: A Frontline Perspective Using Delphi

Real-Time Implementation of a Super Twisting Algorithm for PEM Fuel Cell Power System

Two Birds, One Stone—Reframing Cooking Energy Policies in Africa and Asia

Wind Turbines on German Farms—An Economic Analysis

Determination of a Methodology to Derive Correlations Between Window Opening Mass Flow Rate and Wind Conditions Based on CFD Results

An Approach to State of Charge Estimation of Lithium-Ion Batteries Based on Recurrent Neural Networks with Gated Recurrent Unit

A Comprehensive Review of Operation and Control, Maintenance and Lifespan Management, Grid Planning and Design, and Metering in Smart Grids

Extraction of Boundary Condition Independent Dynamic Compact Thermal Models of LEDs—A Delphi4LED Methodology

An Economic Analysis of Load Leveling with Battery Energy Storage Systems (BESS) in an Electricity Market Environment: The Korean Case

Research on the Impact of Various Emission Reduction Policies on China's Iron and Steel Industry Production and Economic Level under the Carbon Trading Mechanism

City Branding, Sustainable Urban Development and the Rentier State. How Do Qatar, Abu Dhabi and Dubai Present Themselves in the Age of Post Oil and Global Warming?

Investigation and Evaluation of Winter Indoor Air Quality of Primary Schools in Severe Cold Weather Areas of China

Hydropower Plants Frequency Regulation Depending on Upper Reservoir Water Level

Coordinated Frequency and State-of-Charge Control with Multi-Battery Energy Storage Systems and Diesel Generators in an Isolated Microgrid

Automatic and Visual Processing Method of Non-Contact Monitoring for Circular Stormwater Sewage Tunnels Based on LiDAR Data

Simple DC-Link Voltage Balancing Approach for Cascaded H-Bridge Rectifier with Asymmetric Parameters of Independent DC Loads

Impact of $Fe_{3}O_{4}$, CuO and $Al_{2}O_{3}$ on the AC Breakdown Voltage of Palm Oil and Coconut Oil in the Presence of CTAB

Fault Isolability Analysis and Optimal Sensor Placement for Fault Diagnosis in Smart Buildings

Fast Track Integration of Computational Methods with Experiments in Small Wind Turbine Development

A Wide Voltage-Ratio Dual-Output DC Converter for Charging Series-Connected Batteries

Parallel Resonance Mechanism Analysis and Suppression of Inductance-Capacitance-Inductance Grid-Connected Inverters

Optimal Re-Dispatching of Cascaded Hydropower Plants Using Quadratic Programming and Chance-Constrained Programming

Flow Characteristics of Water-HPC Gel in Converging Tubes and Tapered Injectors

Development of an Energy Saving Strategy Model for Retrofitting Existing Buildings: A Korean Case Study

Prediction of the Optimal Vortex in Synthetic Jets

Feasibility Studies of Micro Photosynthetic Power Cells as a Competitor of Photovoltaic Cells for Low and Ultra-Low Power IoT Applications

Mode Recognition and Fault Positioning of Permanent Magnet Demagnetization for PMSM

Sustainable Supply Chain Management Strategy Influence on Supply Chain Management Functions in the Oil and Gas Distribution Industry

A Study on Deep Neural Network-Based DC Offset Removal for Phase Estimation in Power Systems

Compliance of a Generic Type 3 WT Model with the Spanish Grid Code

Reactive Power Capability Model of Wind Power Plant Using Aggregated Wind Power Collection System

Power-mileage-based Algorithm for the Optimization of Distribution Network Structures via Adding Transmission Lines

History Matching and Forecast of Shale Gas Production Considering Hydraulic Fracture Closure

Sliding Mode Observer-Based Load Angle Estimation for Salient-Pole Wound Rotor Synchronous Generators

Components Sizing and Performance Analysis of Hydro-Mechanical Power Split Transmission Applied to a Wheel Loader

Year: 2018, Volume: 12

Year: 2018, Volume: 11

Year: 2018, Volume: 10

Year: 2017, Volume: 11

Year: 2017, Volume: 10

Year: 2016, Volume: 10

Year: 2016, Volume: 9

Year: 2015, Volume: 9

Year: 2015, Volume: 8

Year: 2014, Volume: 8

Year: 2014, Volume: 7

Year: 2013, Volume: 7

Year: 2013, Volume: 6

Year: 2012, Volume: 5

Design and Implementation of Finite Time Nonsingular Fast Terminal Sliding Mode Control for a Novel High Step-Up DC-DC Converter

Content Provider	Directory of Open Access Journals (DOAJ)
Author	Yicheng Liu Jieping Wang Haiyan Tu
Abstract	In this paper, a new, high step-up quadratic boost converter with high conversion efficiency is discussed. A storage capacitor and resonant inductor are connected in series with a clamp capacitor through a diode. These compose a voltage multiplier cell, which is applied on the switch of the quadratic boost converter. The clamp capacitor can protect the switch from a voltage spike and absorb energy when the switch turns off; then, the storage capacitor and resonant inductor are charged by the energy stored in the clamped capacitor to increase the voltage transfer gain. In addition, the voltage multiplier cell can also reduce the voltage stresses of power devices. Then, a 16 V input, 200 V output prototype with 80 W nominal power is built up and tested. Furthermore, a finite time fast terminal sliding mode (NFTSM) control is proposed, with constant frequency for the voltageFundamental Building B213:tracking control of this converter. The new NFTSM is obtained by introducing an adjustable nonlinear term into fast terminal sliding mode (FTSM) control, and a singularity problem is avoided. The experiment illustrates that the maximum efficiency of the proposed converter achieves 95% at $D=0.25$ , $Vo=150$ V. The voltage stress is reduced to half of the corresponding component of the basic boost converter at the same voltage level. Moreover, the proposed NFTSM controller can track the reference signal, and provide a short settling time of about 48 ms with no overshoot, and the system response exhibits strong robustness against 11.7% input voltage disturbance and 30% load variation.
e-ISSN	19961073
DOI	10.3390/en12091716
Journal	Energies
Issue Number	9
Volume Number	12
Language	English
Publisher	MDPI AG
Publisher Date	2019-05-01
Publisher Place	Switzerland
Access Restriction	Open
Subject Keyword	Technology High Step-up Multiplier Cell Quadratic Boost Converter Fast Terminal Sliding Mode Finite Time Convergence
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in