NDLI: Limit Load Determination and Material Characterization of Cracked Polyethylene Miter Pipe Bends

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Tarek, M. A. A. El-Bagory Maher, Y. A. Younan Hossam, E. M. Sallam
Copyright Year	2011
Abstract	The quality of Natural Gas Piping Systems, NGPS, must be ensured against manufacturing defects. The main purpose of the present paper is to investigate the effect of loading mode and load angle (30°,45°, and 60°) on the limit load of miter pipe bends, MPB, under different crack depths a/W = 0 to 0.4 at a crosshead speed 500 mm/min. The geometry of cracked and un-cracked multi miter pipe bends are: pipe bend angle, α = 90°, pipe bend factor, h = 0.844, standard dimension ratio, SDR = 11, and three junctions, m = 3. The material of the investigated pipe is a high-density polyethylene, HDPE, which is commonly used in natural gas piping systems. The welds at the miter pipe junction are produced by butt-fusion welding. For all loading modes the limit load is obtained by the tangent intersection method, TI, from the load deflection curves produced by the specially designed and constructed testing machine at the laboratory. Tensile tests are conducted on specimens longitudinally extruded from the pipe with thickness, T = 10, 30 mm, at different crosshead speeds (5–500 mm/min), and different gauge lengths (G = 20, 25, and 50 mm) to determine the mechanical properties of welded and un-welded specimens. The fracture toughness is determined on the basis of elastic plastic fracture mechanics, EPFM. Curved three-point bend specimens, CTPB, are used. All specimens are provided with artificially pre-crack at the crack tip, a/W = 0.5. The effect of specimen thickness variation (B = 10, 15, 22.5, 30, 37.5, and 45mm) for welded and un-welded specimens is studied at room temperature (Ta = 23°C) and at different crosshead speeds, VC.H, ranging from 5 to 500 mm/min. The study reveals that increasing the crack depth leads to a decrease in the stiffness and limit load of MPB for both in-plane, and out-of-plane bending moment. In case of combined load (out-of-plane and in-plane opening; mode) higher load angles lead to an increase in the limit load. The highest limit load value occurs at a loading angle, φ = 60°. In case of combined load (out-of-plane and in-plane closing; mode) the limit load decreases with increasing load angles. On the other hand, higher limit load values are proved at a load angle, φ = 30°. For combined load opening case; higher values of limit load are obtained. The crosshead speed has a significant effect on the mechanical behavior of both welded and un-welded specimens. The fracture toughness, JIC, is greater for un-welded than welded specimen.
Sponsorship	Pressure Vessels and Piping Division
Starting Page	1049
Ending Page	1058
Page Count	10
File Format	PDF
ISBN	9780791844533
DOI	10.1115/PVP2011-57587
Volume Number	Volume 3: Design and Analysis
Conference Proceedings	ASME 2011 Pressure Vessels and Piping Conference
Language	English
Publisher Date	2011-07-17
Publisher Place	Baltimore, Maryland, USA
Access Restriction	Subscribed
Subject Keyword	Miter pipe bends (mpb) High-density polyethylene (hdpe) Curved three point bend (ctpb) High density polyethylene (hdpe) Tangent intersection (ti) method Butt-fusion (bf) method Density Pipe bends Stress
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in