NDLI: Emerging Technologies for Pipe Joints

Please wait, while we are loading the content...

ANES/ASME Joint National Solar Energy Week

ASME Citrus Engineering Symposium

ASME India Oil and Gas Pipeline Conference

ASME International Mechanical Engineering Congress and Exposition

ASME International Pipeline Geotechnical Conference

ASME Power Conference

ASME Turbine Blade Tip Symposium

ASME/IEEE Joint Rail Conference

ASME/JSME Thermal Engineering Joint Conference

ASME/NRC Pump and Valve Symposium

ASME/USCG Workshop on Marine Technology and Standards

CANEUS: MNT for Aerospace Applications

Dynamic Systems and Control Conference

Energy Nanotechnology International Conference

Energy Sustainability

Engineering Systems Design and Analysis

Engineering Technology Conference on Energy

Fluid Power Systems Technology

Fluids Engineering Division Summer Meeting

Frontiers in Biomedical Devices

Gas Turbine India Conference

Global Congress on NanoEngineering for Medicine and Biology

Heat Transfer Summer Conference

High Temperature Reactor Technology

Information Storage and Processing Systems

Integrated Nanosystems: Design, Synthesis, and Applications

Internal Combustion Engine Division Fall Technical Conference

Internal Combustion Engine Division Spring Technical Conference

International Conference on Fluidized Bed Combustion

International Conference on Fuel Cell Science, Engineering and Technology

International Conference on Integration and Commercialization of Micro and Nanosystems

International Conference on Micro/Nanoscale Heat Transfer

International Conference on Nanochannels, Microchannels, and Minichannels

International Conference on Nuclear Engineering

International Conference on Offshore Mechanics and Arctic Engineering

International Conference on Radioactive Waste Management and Environmental Remediation

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference

International Electronic Packaging Technical Conference and Exhibition

International Heat Transfer Conference

International Joint Power Generation Conference

International Joint Tribology Conference

International Manufacturing Science and Engineering Conference

International Pipeline Conference

1996 1st International Pipeline Conference(IPC1996)

1998 2nd International Pipeline Conference(IPC1998)

2000 3rd International Pipeline Conference(IPC2000)

Volume 1: Codes, Standards and Regulations; Design and Constructions; Environmental; GIS/Database Development; Innovative Projects and Emerging Issues

The Evolution of Risk Management at Enbridge Pipelines

Challenges of Hot Tapping Into a Sour Gas Transmission Line

System Wide Risk-Based Pipeline Integrity Program at TransCanada

Minimizing Risk and Improving Operational Availability in the Pipeline Industry

Formalizing Pipeline Integrity With Risk Assessment Methods and Tools

The National Energy Board’s Revised Onshore Pipeline Regulations OPR-99

Same Yet Different: A Comparison of Pipeline Industries in Canada and Australia

A Full Scale Experimental Study of Fires Following the Rupture of Natural Gas Transmission Pipelines

Experimental Studies of Releases of High Pressure Natural Gas From Punctures and Rips in Above-Ground Pipework

Developing Tolerable Risk Criteria for Gas Transmission Pipelines

An Experimental Evaluation of Critical Buckling Strain Criteria

Planning for Purging and Loading of a Newly Constructed Gas Pipeline System Using a Pipeline Simulator

Responding to a Northern Pipeline Challenge

Importance of Effective Contract Management: GasPacifico Pipeline Project — A Case Study

Use of Isolation STOPPLES® for Valve Replacement on Trans Alaska Pipeline

Implementation of Tuned Vibration Absorbers for Above Ground Pipeline Vibration Control

A Structured Approach to Supplier Performance Measurement

Floating-Roof Tanks: Design and Operation in the Petroleum Industry

New Design Concepts for Pipelines Buried in Permafrost

Field Observations of Cyclical Pipe-Soil Interactions in Permafrost Terrain, KP 5, Norman Wells Pipeline, Canada

Screw Anchor Buoyancy Control Saves an Estimated $12 Million for Enbridge Pipeline

Multi-Pass Weld Hydrogen Management to Prevent Delayed Cracking

The Effect of Microstructural Change on Fracture Behavior in Heat-Affected Zone of API 5L X65 Pipeline Steel

Effect of Orbital Automatic Welding on the Weld Metal Mechanical Properties in API 5L X65 Natural Gas Transmission Pipe

High Strength Linepipe: Current and Future Production

Microstructure of Microalloyed Linepipe Steels

Performance of Insulated Pipelines in Sub-Arctic Conditions

Performance of Pipeline Steels in Sour Service

Wear- and Corrosion-Resistant Ceramics for Protection of Pipelines and Rotating Equipment

The Application of the Battelle “Short Formula” to the Determination of Ductile Fracture Arrest Toughness in Gas Pipelines

An Interim Approach to Determine Dynamic Ductile Fracture Resistance of Modern High Toughness Pipeline Steels

Review of CTOA as a Measure of Ductile Fracture Toughness

Effects of Prestrain on Fracture Toughness and Fatigue-Crack Growth of Line Pipe Steels

Fracture Control for the Alliance Pipeline

Simulation of Dynamic Ductile Failure in Pipelines

On Longitudinal Propagation of a Ductile Fracture in a Buried Gas Pipeline: Numerical and Experimental Analysis

Characterizing Dynamic Crack-Resistance of Pipelines Using Laboratory-Scale Practices

Design, Development and Confirmation of a High Toughness Gas Line Pipe for Alliance Pipeline at Camrose Pipe Company

Ductile Fracture Arrest Assessment in a Gas Transmission Pipeline Using CTOA

Participative Risk Management in the Construction of Onshore Pipelines

Husky Moose Mountain Pipeline: A Case Study of Planning, Environmental Assessment and Construction

The Environmental and Socio-Economic Impacts and Benefits Associated With Developing a Natural Gas Distribution System in Nova Scotia

Pipeline Maintenance in Geotechnically Unstable Areas: A Case Study

Case Study: Environmental Considerations of Horizontal Directional Drills

Wave Propagation Versus Transient Ground Displacement as a Credible Hazard to Buried Oil and Gas Pipelines

Remediation of a Pipeline Facility MTBE Spill

Testing of In Situ and Ex Situ Bioremediation Approaches for an Oil-Contaminated Peat Bog Following a Pipeline Break

A Comprehensive Approach to Monitoring Pipeline River and Stream Crossings

Case Histories of Pipeline Exposures at Stream Crossings in Alberta

Remedial Protection of a Pipeline Crossing of the River Wye, UK

Integrating GIS and GPS Into Today’s Pipeline

Web-Based 3-D GIS and Its Applications for Pipeline Planning and Construction

High Resolution Satellite Imagery: From Spies to Pipeline Management

Pipeline Information System: A Tool for Making Decisions

Development and Remote Access of an In-Line Inspection and Corrosion Growth Database

Multi-Pipeline Geographical Information System Based on High Accuracy Inertial Surveys

Quality Control and Management of Inspection and Data Collection

The Use of GIS and Remote Sensed Data as an Aid to Pipeline Integrity

A Methodology to Maintain Pipeline Integrity at Water Crossings

An Emerging Methodology of Slope Hazard Assessment for Natural Gas Pipelines

Full-Scale Fracture Propagation Experiments: A Recent Application and Future Use for the Pipeline Industry

Fibre Reinforced Composites in Pipeline Applications: Design Issues and Current Research

Special Problems in Pipeline Risk Assessment

Challenges in the Development of Market-Based Pipeline Investments

High Pressure Gas Pipelines: Trends for the New Millennium

Emerging Technologies for Pipe Joints

Determination of Pipe Roughness and Heat Transfer Coefficient in Pipeline Networks Using Multidomain Solution Method

Introduction of Aerial Based and Laser Scan Topographics Survey for Use in Pipeline Route Selection

Fracture Behaviour and Defect Evaluation of Large Diameter, HSLA Steels, Very High Pressure Linepipes

Use of Robotic Technology for Cast Iron Pipeline Repair

Highly Tensioned Suspended Pipelines

New Technology to Recycle and Rebuild Worn Polyurethane Pipeline Pigs

Gulf Water Injection Pipeline and Facilities De-Bottlenecking

Simulation of Transient Liquid Pipeline Flow Using the Deformable Characteristic Grid

Computer Simulations of Low Concentrations Slurry Flows in Pipelines

Transient Pig Motion Through Non-Isothermal Gas and Liquid Pipelines

Use of Tubular Joint Stress Concentration Factor Parametric Formulae in the Analysis of Large Diameter Pipework Connections

Chinese Oil and Gas Pipeline Industry, Its Current Situation and Future

Innovative Project Management Techniques: Major International Pipeline Project

New Technical and Economic Solutions for Gas Exploitation in the Amazon Region (Peru-Brazil Pipeline)

PRODUT: A Pipeline Technological Program to Face the Challenges in Brazil

Volume 2: Integrity and Corrosion; Offshore Issues; Pipeline Automation and Measurement; Rotating Equipment

2002 4th International Pipeline Conference(IPC2002)

2004 International Pipeline Conference(IPC2004)

2006 International Pipeline Conference(IPC2006)

2008 7th International Pipeline Conference(IPC2008)

2010 8th International Pipeline Conference(IPC2010)

2012 9th International Pipeline Conference(IPC2012)

2014 10th International Pipeline Conference(IPC2014)

2016 11th International Pipeline Conference(IPC2016)

2018 12th International Pipeline Conference(IPC2018)

International Solar Energy Conference

International Symposium on Flexible Automation

Multifunctional Nanocomposites and Nanomaterials International Conference

Noise Control and Acoustics Division Conference

North American Waste-to-Energy Conference

Pressure Technology

Pressure Vessels and Piping Conference

Rail Transportation Division Conference

Small Modular Reactors Symposium

Smart Materials, Adaptive Structures and Intelligent Systems

Summer Bioengineering Conference

Turbo Expo: Power for Land, Sea, and Air

Verification and Validation

Water Quality, Drought, Human Health and Engineering Conference

Wind Energy Symposium

World Conference on Innovative Virtual Reality

World Tribology Congress

Emerging Technologies for Pipe Joints

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Abid, Muhammad David, H. Nash Webjörn, Jan
Copyright Year	2000
Abstract	In recent years new technologies, novel products, improved services and better contracting procedures are emerging and showing great potential for increased performance and safety. This is increasingly evident for applications in sectors like offshore, petrochemical and refining, ship and submarine building, nuclear power, hydropower, oil and gas transfer lines where failures are can lead to hazards to life. One such technology is a non-gasketed pipe connection and is recognised by the authors as representative of an ‘emerging technology’. It is based on several un-orthodox principles and does consist not only of a pair of welding neck flanges, but of an all-inclusive entire system, comprising bolts, washers, nuts, wrenches, procedures and training. This paper is based on two years of experimental and finite element studies [Ref 1,2] of both standard/conventional ANSI (gasketed) and modern non-gasketed flanged joints. This has led to a deeper understanding of the requirements for a successful assembly and long term usage. ANSI and VCF joints have been subject to internal pressure, axial and lateral forces, with these loads having been applied both singly and in combinations. Mode of load acting in the joint i.e. static or dynamic has been studied for both kinds of joints. Experimental and analytical results have been compared. Some practical considerations on the use of important emerging technology i.e. non-gasketed pipe joints in comparison to conventional gasketed systems are presented. Of fundamental importance is an insight into the mechanism of the bolted joint showing the effect from an external load on a preloaded bolt. It is found that it can be made near zero hence, in a properly built, non-gasketed bolted joint a static mode rules, and therefore the stamina of such a joint is unlimited. Other practical issues of fabrication, handling, surface damage and assembly, have been examined in the lab and on site and a summary of results is presented. In addition a probability risk assessment has been undertaken and results compared with the standard (conventional) ANSI type joints. In addition this paper demonstrates that the novel system is an efficient and well -engineered alternative to traditionally designed joints.
Sponsorship	Pipeline Division
File Format	PDF
ISBN	9780791840245
DOI	10.1115/IPC2000-165
Volume Number	Volume 1: Codes, Standards and Regulations; Design and Constructions; Environmental; GIS/Database Development; Innovative Projects and Emerging Issues
Conference Proceedings	2000 3rd International Pipeline Conference
Language	English
Publisher Date	2000-10-01
Publisher Place	Calgary, Alberta, Canada
Access Restriction	Open
Subject Keyword	Welding Bolted joints Flanges Probability Petrochemicals Hazards Pressure Pipe joints Stress Underwater vehicles Nuclear power Hydropower Ships Risk assessment Ocean engineering Manufacturing Finite element analysis Safety Damage Pipes Failure
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in