NDLI: Effect of Hold-Time Interspersed With Cyclic Loading on Corrosion Fatigue Crack Growth Rate of a Steel in Sodium Chloride Solution

Please wait, while we are loading the content...

ANES/ASME Joint National Solar Energy Week

ASME Citrus Engineering Symposium

ASME India Oil and Gas Pipeline Conference

ASME International Mechanical Engineering Congress and Exposition

ASME 2002 International Mechanical Engineering Congress and Exposition(IMECE2002)

ASME 2003 International Mechanical Engineering Congress and Exposition(IMECE2003)

ASME 2004 International Mechanical Engineering Congress and Exposition(IMECE2004)

ASME 2005 International Mechanical Engineering Congress and Exposition(IMECE2005)

ASME 2006 International Mechanical Engineering Congress and Exposition(IMECE2006)

ASME 2007 International Mechanical Engineering Congress and Exposition(IMECE2007)

ASME 2008 International Mechanical Engineering Congress and Exposition(IMECE2008)

ASME 2009 International Mechanical Engineering Congress and Exposition(IMECE2009)

ASME 2010 International Mechanical Engineering Congress and Exposition(IMECE2010)

ASME 2011 International Mechanical Engineering Congress and Exposition(IMECE2011)

ASME 2012 International Mechanical Engineering Congress and Exposition(IMECE2012)

ASME 2013 International Mechanical Engineering Congress and Exposition(IMECE2013)

ASME 2014 International Mechanical Engineering Congress and Exposition(IMECE2014)

ASME 2015 International Mechanical Engineering Congress and Exposition(IMECE2015)

ASME 2016 International Mechanical Engineering Congress and Exposition(IMECE2016)

ASME 2017 International Mechanical Engineering Congress and Exposition(IMECE2017)

ASME 2018 International Mechanical Engineering Congress and Exposition(IMECE2018)

Volume 7: Fluids Engineering

Volume 13: Design, Reliability, Safety, and Risk

Volume 4A: Dynamics, Vibration, and Control

Volume 6A: Energy

Volume 1: Advances in Aerospace Technology

Volume 2: Advanced Manufacturing

Volume 5: Engineering Education

Volume 4B: Dynamics, Vibration, and Control

Volume 12: Materials: Genetics to Structures

Mechanical Properties of 3D Printed Biomimicked Composites

Effect of Hold-Time Interspersed With Cyclic Loading on Corrosion Fatigue Crack Growth Rate of a Steel in Sodium Chloride Solution

Influences of Plasticity-Induced Crack Closure on Fatigue Crack Healing of Carbon Steel With Heat Treatment

Degradation of the Strength of a Grain and a Grain Boundary due to the Accumulation of the Structural Defects of Crystal

Crystallinity-Induced Variation of the Electronic Characteristics of Electroplated Gold Thin Films

A Crack Detection and Evaluation Method for Self-Piercing Riveting

Additive Manufacturing of Polymer Nanocomposites With In-Situ Strain Sensing Capability

A Novel Microlaser Based Plasmonic-Polymer Hybrid Resonator

Influence of Thermal Ratcheting on the Creep and Mechanical Properties of High Density Polyethylene (HDPE)

Investigation of Process Parameters on Dry Sliding Wear of Self-Lubricating Metal Matrix Composites

Effect of Micro (Banana) and Nano (SiC) Fillers on Mechanical Behaviors of Basalt/Epoxy Hybrid Composites

Localized Fatigue Response Evaluation of Weld Regions Through Cyclic Indentation Studies

Influence of Ca-Ba and Sr Base Inoculants on Metallurgical and Mechanical Properties of Grey and Ductile Cast Irons

Modeling the Influence of Microstructure on Stress Distributions and Concentrations in Pitting Corrosion

Anti-Corrosive Coating Using Recycled High Density Polyethylene for Automotive Chassis

A Study on the Corrosion and Mechanical Properties of an Al6063 Reinforced With Egg Shell Ash and Rice Husk Ash

Experimental Investigating the Impact of Ionic Liquid on PET’s Properties

Fatigue Crack Growth Rate Studies on Stainless Steel Welds

Assessment of Induced Delamination During End-Milling of Natural Fiber Reinforced Composites: A Statistical Analysis

Investigations on the Structure and Properties of the Hot Extruded AA2014-Nano SiCp Composite

Effect of Constrained Groove Pressing on Mechanical Properties of Nitinol Alloy

Effect of Calcium Hydroxide and Water to Solid Ratio on Compressive Strength of Mordenite-Based Geopolymer and the Evaluation of its Thermal Transmission Property

Influence of the Microstructure on the Creep Behaviour of Tin-Silver-Copper Solder

A Three-Dimensional Nested Reinforcing Mesh in Elastomers for Crashworthy Applications

Advanced Recycled Materials for Economic Production of Fire Resistant Fabrics

A Thermo-Electro-Elasto-Viscoplastic Damage Internal State Variable (ISV) Model for Ductile Metals

Numerical Investigation on Percolation Threshold of CNT-Reinforced Conductive Composites Based on Three-Dimensional Monte Carlo Method

Dexterous Hybrid Robotics for High Precision Applications

Hybrid Alumina Composites for Cutting Tool Inserts: Material Design and Development

Uncertainty Quantification of Artificial Neural Network Based Machine Learning Potentials

Viscoelastic Behavior of Carbon Nanotube Yarns and Twisted Coils

Stochastic Modeling of a High Speed Composite Flywheel for Energy Storage

Determination of Key Influencing Factors on Thermal Conductivity Enhancement of Graphene Nano-Platelets Reinforced Epoxy

Prediction of Gas Permeation in Polymeric Materials Used in Oil and Gas Industry

Thermal Resistance of Polystyrene-Seeded Concrete for Better Insulative Value

An Elastothermoviscoplasticity Anisotropic Damage Model for Short Fiber Reinforced Polymer Composites

Functionalized Cellulose Nanocrystals for Improving the Mechanical Properties of Poly(Lactic Acid)

Investigating Effects of Graphene Nanoinclusions for Improved Desalination Rates of Salt Water Under Solar Heat

Integrating an Analytical Uncertainty Quantification Approach to Multi-Scale Modeling of Nanocomposites

Simulation of Liquid Crystal Polymer Directionality During Cast Film Extrusion

Stabilization of Graphene Dispersions by Cellulose Nanocrystals Colloids

A Comparative Assessment of the Structural, Elastic and Electronic Properties of Nb3Pt and NbPt3 Phases Through First-Principles Study

First-Principle Investigation of Structural, Elastic, Electronic and Thermal Properties of Dysprosium Hafnate Oxides

Effect of Nano Silica on Compressive Strength of Concrete

The Effects of Single-Walled Carbon Nanotubes and Ionic Liquids in Reduction of Friction and Wear

Ionic Liquids As Additives to Cutting Fluids to Reduce Machine Tool Friction and Wear

Effect of Carbon Nanotube-Phosphinate Ionic Liquid Thin Boundary Layer on the Tribological Behavior of Aluminum Alloy in Steel-on-Aluminum Contact

Estimation of Energy Conservation in Internal Combustion Engine Vehicles Using Ionic Liquid As an Additive

Volume 10: Micro- and Nano-Systems Engineering and Packaging

Volume 9: Mechanics of Solids, Structures, and Fluids

Volume 11: Acoustics, Vibration, and Phononics

Volume 8A: Heat Transfer and Thermal Engineering

Volume 3: Biomedical and Biotechnology Engineering

Volume 6B: Energy

Volume 8B: Heat Transfer and Thermal Engineering

ASME International Pipeline Geotechnical Conference

ASME Power Conference

ASME Turbine Blade Tip Symposium

ASME/IEEE Joint Rail Conference

ASME/JSME Thermal Engineering Joint Conference

ASME/NRC Pump and Valve Symposium

ASME/USCG Workshop on Marine Technology and Standards

CANEUS: MNT for Aerospace Applications

Dynamic Systems and Control Conference

Energy Nanotechnology International Conference

Energy Sustainability

Engineering Systems Design and Analysis

Engineering Technology Conference on Energy

Fluid Power Systems Technology

Fluids Engineering Division Summer Meeting

Frontiers in Biomedical Devices

Gas Turbine India Conference

Global Congress on NanoEngineering for Medicine and Biology

Heat Transfer Summer Conference

High Temperature Reactor Technology

Information Storage and Processing Systems

Integrated Nanosystems: Design, Synthesis, and Applications

Internal Combustion Engine Division Fall Technical Conference

Internal Combustion Engine Division Spring Technical Conference

International Conference on Fluidized Bed Combustion

International Conference on Fuel Cell Science, Engineering and Technology

International Conference on Integration and Commercialization of Micro and Nanosystems

International Conference on Micro/Nanoscale Heat Transfer

International Conference on Nanochannels, Microchannels, and Minichannels

International Conference on Nuclear Engineering

International Conference on Offshore Mechanics and Arctic Engineering

International Conference on Radioactive Waste Management and Environmental Remediation

International Design Engineering Technical Conferences and Computers and Information in Engineering Conference

International Electronic Packaging Technical Conference and Exhibition

International Heat Transfer Conference

International Joint Power Generation Conference

International Joint Tribology Conference

International Manufacturing Science and Engineering Conference

International Pipeline Conference

International Solar Energy Conference

International Symposium on Flexible Automation

Multifunctional Nanocomposites and Nanomaterials International Conference

Noise Control and Acoustics Division Conference

North American Waste-to-Energy Conference

Pressure Technology

Pressure Vessels and Piping Conference

Rail Transportation Division Conference

Small Modular Reactors Symposium

Smart Materials, Adaptive Structures and Intelligent Systems

Summer Bioengineering Conference

Turbo Expo: Power for Land, Sea, and Air

Verification and Validation

Water Quality, Drought, Human Health and Engineering Conference

Wind Energy Symposium

World Conference on Innovative Virtual Reality

World Tribology Congress

Effect of Hold-Time Interspersed With Cyclic Loading on Corrosion Fatigue Crack Growth Rate of a Steel in Sodium Chloride Solution

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Raghu, V. Prakash Sampath, Dhinakaran
Copyright Year	2018
Abstract	Corrosion fatigue growth behavior of structural steels at low cyclic frequency is characterized by an increase in crack growth rate in the threshold and Paris regions, due to the simultaneous action of cyclic mechanical load (fatigue) and corrosive environment. Knowledge on the effect of load sequence on corrosion fatigue crack growth is important to set out the realistic design and prognosis criteria for components operating under corrosive environments. In this study, the corrosion fatigue crack growth rate under the effect of hold-time (1000s), at a maximum stress intensity factor (Kmax), interspersed during cyclic load on was studied experimentally on a Mn-Ni-Cr steel under 3.5% NaCl solution at a constant stress intensity factor range (ΔK) of 15 MPa √m; the corrosion crack growth rate was evaluated for three different frequencies of: 0.01, 0.1 and 1 Hz. As a result of hold time at the peak load, the exposure time for the crack-tip to interact with the environment increased, which could enhance the corrosion crack growth rates. To verify if this corrosion effect can be contained, electrode potential of (−) 850 mV and (−) 950 mV SCE was applied to the specimen to reduce the extent of corrosion contribution to crack growth rate. The fatigue crack growth rate (da/dN) increased when the frequency was decreased from 1 to 0.01 Hz at all electrode potentials. However, the crack growth rate at 0.01 Hz increased by an order of magnitude with a tensile hold at Kmax for 1000 s compared with the crack growth rate during continuous cyclic load for a given electrode potential. The crack growth rate reduced when the electrode potential was decreased to −950 mV SCE. The enhancement of corrosion fatigue crack growth rate with the introduction of a hold-time is explained using crack-tip strain rate assisted anodic dissolution.
File Format	PDF
ISBN	9780791852170
DOI	10.1115/IMECE2018-86417
Volume Number	Volume 12: Materials: Genetics to Structures
Conference Proceedings	ASME 2018 International Mechanical Engineering Congress and Exposition
Language	English
Publisher Date	2018-11-09
Publisher Place	Pittsburgh, Pennsylvania, USA
Access Restriction	Subscribed
Subject Keyword	Electrodes Design Corrosion Sodium Peak load Fatigue Fracture (materials) Structural steel Steel Fatigue cracks Stress
Content Type	Text
Resource Type	Article

Central Library (ISO-9001:2015 Certified)
Indian Institute of Technology Kharagpur
Kharagpur, West Bengal, India | PIN - 721302

See location in the Map
03222 282435
Mail: support@ndl.gov.in

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in