NDLI: Design and Analysis of Ejector Powerplant System

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Menandro, S. Berana Edward, T. Bermido
Copyright Year	2013
Abstract	An ejector is a device with no moving components and is made up of four main parts: converging-diverging nozzle, suction chamber, mixing section and diffuser. It has become popular in refrigeration system as it gives the advantage of recovering expansion energy from high pressure difference into compression energy. In this study, the potential use of ejector in powerplants that use low-grade or low temperature heat sources was conceptualized and analytically investigated. A novel combination of the ejector and the organic Rankine cycle (ORC) was proposed. The driving fluid in the ejector of the proposed powerplant cycle is the high-pressure liquid in the separator that is just circulated back to the evaporator in the ORC. Further increase in turbine temperature drop (TTD), which can increase the power output and efficiency of the plant, can be achieved through expansion, mixing and recompression processes in the ejector. Ocean thermal energy conversion (OTEC), solar-boosted OTEC (SOTEC), solar-thermal, waste-heat driven, biomass and geothermal powerplants were considered in the analysis. Mathematical models in our previous studies were developed and used to calculate for nozzle and ejector parameters. The geometric profile of the ejector for optimization with categorized heat sources was determined. Isentropic, internally reversible, and irreversible two-phase nozzle expansions were analyzed. Two-phase flow calculations were continued in the mixing section. It was assumed that the constant-pressure mixing of the primary and secondary fluids occur at the hypothetical throat inside the constant-area section. Calculation for shock wave in the mixing section was also done. The diffuser was analyzed in a similar manner with the nozzle. Calculation for other components and plant efficiencies was finally conducted. Ammonia and propane which are both natural working fluids were used in the analysis. Evaporator temperature range from 293.15 K to 393.15 K and condenser and ambient temperatures range from 283.15 K to 308.15 K were used in the analysis. The lowest ambient temperature of 283.15 K was used for the OTEC and SOTEC powerplants. It was shown that ammonia and propane can operate up to 11 K and 12 K below the ambient temperature, respectively. Ejector efficiency ranged from 90 to 95% for both working fluids. The maximum efficiencies of the ejector powerplant were 19.2% for ammonia and 14.9% for propane, compared to 11.7% and 9.8% of the conventional ORC. It was analytically determined that the efficiency of the ejector powerplant is higher than that of the ORC powerplant for the same working fluid and conditions of the evaporator, condenser and the ambient.
File Format	PDF
ISBN	9780791856284
DOI	10.1115/IMECE2013-65130
Volume Number	Volume 6A: Energy
Conference Proceedings	ASME 2013 International Mechanical Engineering Congress and Exposition
Language	English
Publisher Date	2013-11-15
Publisher Place	San Diego, California, USA
Access Restriction	Subscribed
Subject Keyword	Suction Cycles Temperature Compression Condensers (steam plant) Biomass Optimization Design High pressure (physics) Fluids Two-phase flow Ejectors Power stations Nozzles Turbines Low temperature Organic rankine cycle Pressure Shock waves Heat Geothermal power stations Solar energy Diffusers Refrigeration Waste heat Ocean thermal energy conversion
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in