NDLI: Blast Overpressure Measured on a Bare vs. Helmeted Rigid Headform

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Baumer, Timothy Mark, A. Rapo Jessica, M. Wong Brian, J. Powell Brett, D. Juhas Philemon, C. Chan James, F. Mackiewicz
Copyright Year	2013
Abstract	There is significant concern that blast overpressure can cause mild traumatic brain injury (mTBI). An accurate understanding of the blast flow and overpressure event as well as it’s interaction with the head and helmet system is a necessary first step in establishing loading conditions to the head. It also provides a means for model validation and other predictive capabilities. A custom-designed Blast Overpressure Bust (BOB) containing 22 surface pressure sensors was rigidly mounted in a live-fire blast event. The blast field tests were conducted in an open field using 4 lbs. of cylindrical C4 charges suspended 48″ above the pad. The BOB was mounted to a torso surrogate and positioned 92″ from the hanging charge. The BOB was oriented at blast impact angles of 0 (front-facing), 45, 90, and 180 degrees. The BOB was tested in both bare and helmeted configurations. Data recorded across a bare headform at each angle established a baseline for the pressure trace at each sensor location. Two helmeted cases were investigated: Advanced Combat Helmet (ACH) with the sling suspension system and ACH with Team Wendy pads. Results showed peak pressures on exposed surfaces normal to the blast were ∼1200kPa with side-on pressures of ∼400kPa. The addition of a helmet did not alter the peak normal pressures, but showed slight to moderate increases in pressure beneath the helmet based on the amount of cushioning present. The sling suspension, which leaves an open gap between the head and helmet, resulted in several recorded amplification points beneath the helmet with the peaks reaching ∼800kPa. The Team Wendy pads trials, which effectively fill the gap between the head and helmet, showed amplifications with peaks of ∼500kPa. An additional set of tests was conducted using an ingress barrier positioned between the head and helmet at the brim. Results showed pressures under the helmet that were lower than the bare headform trials. While it was shown that adding a helmet did in fact increase pressures relative to the bare headform case, these amplifications were still far less than the peak pressure exerted on the exposed surfaces of the headform. The data presented herein is the most robust data set to date for pressures exerted on a helmeted headform and is considered applicable to the first 3–5ms of an unconstrained system, during which time motion is minimal.
File Format	PDF
ISBN	9780791856215
DOI	10.1115/IMECE2013-63260
Volume Number	Volume 3A: Biomedical and Biotechnology Engineering
Conference Proceedings	ASME 2013 International Mechanical Engineering Congress and Exposition
Language	English
Publisher Date	2013-11-15
Publisher Place	San Diego, California, USA
Access Restriction	Subscribed
Subject Keyword	Pressure sensors Suspension systems Traumatic brain injury Model validation Fire Teams Sensors Warfare Flow (dynamics) Pressure
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in