Please wait, while we are loading the content...
Please wait, while we are loading the content...
| Content Provider | The American Society of Mechanical Engineers (ASME) Digital Collection |
|---|---|
| Author | Mohanty, Sankalp Wells, Stephen Hung, Wayne |
| Copyright Year | 2012 |
| Abstract | Product miniaturization trend is inevitable. The needs for minimum invasive surgery, smaller sensors for smart machinery, packing more features on a product… require mass production of smaller components from engineering materials. Fabrication of microcomponents requires knowledge of micromachining to avoid costly tool failure and part damage. This research investigates microdrilling of commercially pure titanium, nickel titanium (Nitinol), and 316L stainless steel. A surface was polished and drilled in rows of ten holes. Through hole drilling at 6:1 aspect ratio was performed on NiTi sheets while blind holes were drilled at 10:1 aspect ratio on Ti or 316L blocks. Microdrills with 100–150 μm diameter and 1.5–3.5 mm flute length were utilized up to 50,000 rpm in minimum quantity lubrication. Finite element models were developed to find upper limits of drilling parameters. Flank wear of 15μm on fine grained WC-Co uncoated tools and peeling of coating layer were used as tool life criteria. Scanning electron microscopy was used to observed tool failure mechanism. Tool life modeling and hole quality were performed to evaluate and compare tool performance. Although successfully drilling all materials at 10:1 aspect ratio, excessive built-up-edge (BUE) was found on microdrills at all drilling parameters. Such BUE effectively blunted the drill tips and caused drill wandering, degraded hole quality due to rubbing against the drilled wall, work-hardened the drilled surface and accelerated drill wear, and formed burrs at both entrance and exit ends. Wear of a microdrill at the outer corner was more pronounced when drilling CP titanium, but attrition wear at chisel edge was more significant for 316L stainless steel. The classical Taylor equation for macromachining was applicable in microdrilling to rank tool performance and machinability of tested materials. For the same cutting speed of 20 m/min and comparable drilling distance of about 35 mm, CP titanium can be microdrilled 400% faster than 316L stainless steel when applying 0.1 μm/flute chip load for the former and 0.02 μm/flute for the latter. The AlTiN coated drills improved tool life by at least 120%. This coating reduced BUE, drastically improved hole position accuracy by 115%, and decreased hole diameter variation from 0.110% to 0.003% for each mm of drilling distance. |
| Starting Page | 1969 |
| Ending Page | 1977 |
| Page Count | 9 |
| File Format | |
| ISBN | 9780791845196 |
| DOI | 10.1115/IMECE2012-87523 |
| Volume Number | Volume 3: Design, Materials and Manufacturing, Parts A, B, and C |
| Conference Proceedings | ASME 2012 International Mechanical Engineering Congress and Exposition |
| Language | English |
| Publisher Date | 2012-11-09 |
| Publisher Place | Houston, Texas, USA |
| Access Restriction | Subscribed |
| Subject Keyword | Mass production Packing (shipments) Polishing Coatings Machinery Modeling Biomaterials Cutting Finite element model Nickel titanium alloys Surgery Titanium Coating processes Lubrication Manufacturing Sensors Damage Failure Failure mechanisms Drilling Scanning electron microscopy Packings (cushioning) Micromachining Machinability Chisels Hole quality Stress Stainless steel Wear Nickel Drills (tools) Corners (structural elements) |
| Content Type | Text |
| Resource Type | Article |
National Digital Library of India (NDLI) is a virtual repository of learning resources which is not just a repository with search/browse facilities but provides a host of services for the learner community. It is sponsored and mentored by Ministry of Education, Government of India, through its National Mission on Education through Information and Communication Technology (NMEICT). Filtered and federated searching is employed to facilitate focused searching so that learners can find the right resource with least effort and in minimum time. NDLI provides user group-specific services such as Examination Preparatory for School and College students and job aspirants. Services for Researchers and general learners are also provided. NDLI is designed to hold content of any language and provides interface support for 10 most widely used Indian languages. It is built to provide support for all academic levels including researchers and life-long learners, all disciplines, all popular forms of access devices and differently-abled learners. It is designed to enable people to learn and prepare from best practices from all over the world and to facilitate researchers to perform inter-linked exploration from multiple sources. It is developed, operated and maintained from Indian Institute of Technology Kharagpur.
Learn more about this project from here.
NDLI is a conglomeration of freely available or institutionally contributed or donated or publisher managed contents. Almost all these contents are hosted and accessed from respective sources. The responsibility for authenticity, relevance, completeness, accuracy, reliability and suitability of these contents rests with the respective organization and NDLI has no responsibility or liability for these. Every effort is made to keep the NDLI portal up and running smoothly unless there are some unavoidable technical issues.
Ministry of Education, through its National Mission on Education through Information and Communication Technology (NMEICT), has sponsored and funded the National Digital Library of India (NDLI) project.
| Sl. | Authority | Responsibilities | Communication Details |
|---|---|---|---|
| 1 | Ministry of Education (GoI), Department of Higher Education |
Sanctioning Authority | https://www.education.gov.in/ict-initiatives |
| 2 | Indian Institute of Technology Kharagpur | Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project | https://www.iitkgp.ac.in |
| 3 | National Digital Library of India Office, Indian Institute of Technology Kharagpur | The administrative and infrastructural headquarters of the project | Dr. B. Sutradhar bsutra@ndl.gov.in |
| 4 | Project PI / Joint PI | Principal Investigator and Joint Principal Investigators of the project |
Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon |
| 5 | Website/Portal (Helpdesk) | Queries regarding NDLI and its services | support@ndl.gov.in |
| 6 | Contents and Copyright Issues | Queries related to content curation and copyright issues | content@ndl.gov.in |
| 7 | National Digital Library of India Club (NDLI Club) | Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach | clubsupport@ndl.gov.in |
| 8 | Digital Preservation Centre (DPC) | Assistance with digitizing and archiving copyright-free printed books | dpc@ndl.gov.in |
| 9 | IDR Setup or Support | Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops | idr@ndl.gov.in |
|
Loading...
|