NDLI: Pressure and Flow Characteristics in a Rotating Two-Pass Square Duct With 45° Angled Ribs

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Liou, Tong-Miin Dai, Guang-Yuan
Copyright Year	2003
Abstract	Measurements are presented of the local velocity and wall static-pressure distributions by using laser-Doppler velocimeter and pressure transducers, respectively, in a rotating two-pass square duct with ribs placed on the leading and trailing walls at an angle of 45° to the main stream. The ribs were square in cross-section and in a parallel mode of arrangement. The rib-height/duct-height ratio and the pitch/rib-height ratio were 0.136 and 10, respectively. The duct Reynolds number was 1×104 and rotation number Ro ranged from 0 to 0.2. Results are addressed in terms of the evolutions of both main flow and cross-stream secondary flow and the distributions of the pressure coefficient, which are lacking in the published literature for ducts ribbed with 45° ribs and under rotation. In addition, the relationships between the regional averaged Nusselt number, transverse and convective mean velocity component, and turbulent kinetic energy are documented. The 45° ribs are found to reduce the pressure loss to 60% of the 90° ribs for rotating duct under same operating conditions. For CFD reference, the fully developed flow condition is absent for the rotating ducts investigated. The measured evolution of complex secondary flow vortices is believed to be a challenge to numerical simulations.
Sponsorship	International Gas Turbine Institute
Starting Page	225
Ending Page	235
Page Count	11
File Format	PDF
ISBN	0791836886
DOI	10.1115/GT2003-38346
e-ISBN	0791836711
Volume Number	Volume 5: Turbo Expo 2003, Parts A and B
Conference Proceedings	ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference
Language	English
Publisher Date	2003-06-16
Publisher Place	Atlanta, Georgia, USA
Access Restriction	Subscribed
Subject Keyword	Turbulence Computational fluid dynamics Computer simulation Ducts Reynolds number Flow (dynamics) Pressure Rotation Lasers Vortices Velocimeters Kinetic energy Pressure transducers
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in

Pressure and Flow Characteristics in a Rotating Two-Pass Square Duct With 45-Deg Angled Ribs

Heat Transfer, Fluid Flow, and Pressure Measurements Inside a Rotating Two-Pass Duct With Detached 90° Ribs

Fluid Flow and Heat Transfer in a Rotating Two-Pass Square Duct With In-Line 90° Ribs

Characteristics of Pressure, Flow, and Heat Transfer in Rotating Internal Cooling Passages With Attached-Detached Ribs

Heat Transfer and Fluid Flow in a Square Duct With 12 Different Shaped Vortex Generators

Rib Spacing Effect on Heat Transfer and Pressure Loss in a Rotating Two-Pass Rectangular Channel (AR=1:2) With 45-Degree Angled Ribs

Fluid Flow Inside a Rectangular Duct With Two Opposite Walls Roughened by Deepened Scales

High Rotation Number Heat Transfer of Rotating Trapezoidal Duct With 45-deg Staggered Ribs and Bleeds From Apical Side Wall

Heat Transfer in a Radially Rotating Square-Sectioned Duct With Two Opposite Walls Roughened by 45° Staggered Ribs

Pressure and Flow Characteristics in a Rotating Two-Pass Square Duct With 45° Angled Ribs

Similar Documents

Pressure and Flow Characteristics in a Rotating Two-Pass Square Duct With 45-Deg Angled Ribs

Heat Transfer, Fluid Flow, and Pressure Measurements Inside a Rotating Two-Pass Duct With Detached 90° Ribs

Fluid Flow and Heat Transfer in a Rotating Two-Pass Square Duct With In-Line 90° Ribs

Characteristics of Pressure, Flow, and Heat Transfer in Rotating Internal Cooling Passages With Attached-Detached Ribs

Heat Transfer and Fluid Flow in a Square Duct With 12 Different Shaped Vortex Generators

Rib Spacing Effect on Heat Transfer and Pressure Loss in a Rotating Two-Pass Rectangular Channel (AR=1:2) With 45-Degree Angled Ribs

Fluid Flow Inside a Rectangular Duct With Two Opposite Walls Roughened by Deepened Scales

High Rotation Number Heat Transfer of Rotating Trapezoidal Duct With 45-deg Staggered Ribs and Bleeds From Apical Side Wall

Heat Transfer in a Radially Rotating Square-Sectioned Duct With Two Opposite Walls Roughened by 45° Staggered Ribs

Pressure and Flow Characteristics in a Rotating Two-Pass Square Duct With 45° Angled Ribs