NDLI: Reduction of NOx and CO to Below 2ppm in a Diffusion Flame

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Sahai, Vivek Cheng, Dah-Yu
Copyright Year	2003
Abstract	The so-called “sudden death reaction” theory, for a diffusion flame, assumes that the fuel and oxidizer diffuse toward a stoichiometric concentration surface, and then suddenly disappear, due to their combustion which produces water and carbon dioxide. The presence of NOx and CO in the combustion products cannot be explained by the “sudden death” theory. NOx, due to its high activation energy may not be formed prior to the formation of H2O and CO2. NOx is created when both oxygen and nitrogen are present in a high temperature volume; after all the combustible species are consumed. Appearance of CO indicates a lack of oxygen or a low gaseous temperature. Traditionally, when steam is injected into the combustion air, its high heat capacity reduces the flame temperature, which then reduces NOx formation, and this is usually accompanied by high CO formation. This phenomenon is caused by the dilution of oxygen as a quenching effect. This paper describes a novel approach that reverses the traditional wisdom of using steam to control NOx and CO formation, by accelerating the combustion process. This new approach begins with (1) shrinking the flame envelope, (2) enhancing the oxygen diffusion rate, and (3) suppressing the nitrogen concentration diffusion rate. Test results showed that (1) a high temperature volume could form NOx after the combustion of fuel is reduced to a minimum, and (2) that a very high fuel jet momentum increases the oxygen diffusion rate, thus reducing the flame envelope. Also due to the inward movement of the flame envelope, the residential time for NOx formation is also reduced and with the presence of a diluent, the nitrogen penetration rate into the flame is controlled. When all three phenomena are working together, total NOx was reduced downward to below 2 ppm without losing flame stability. Since this process generates enhanced oxygen diffusion, CO has always been seen to be below 2ppm, which indicates extremely high combustion efficiency. The above theory was first simulated by numerical methods using a 3-step reaction for nitrogen and oxygen, and was further expanded to a 28-step chemical kinetic model. The simulation used gas turbine compressor discharge temperatures to produce real adiabatic flame temperatures. Atmospheric tests of real full-scale gas turbine combustors were used with appropriate air temperatures, to simulate adiabatic flame temperatures. Below 2ppm NOx and CO were consistently obtained, independent of turbine types. Actual turbine tests on GE 6B and W501D5A turbines consistently indicated pressure dependent exponents of 0.1.
Sponsorship	International Gas Turbine Institute
Starting Page	177
Ending Page	185
Page Count	9
File Format	PDF
ISBN	0791836851
DOI	10.1115/GT2003-38208
e-ISBN	0791836711
Volume Number	Volume 2: Turbo Expo 2003
Conference Proceedings	ASME Turbo Expo 2003, collocated with the 2003 International Joint Power Generation Conference
Language	English
Publisher Date	2003-06-16
Publisher Place	Atlanta, Georgia, USA
Access Restriction	Subscribed
Subject Keyword	Water Temperature Diffusion flames Carbon dioxide Combustion High temperature Fuels Flames Gas turbines Quenching (metalworking) Turbines Oxygen Stability Heat capacity Momentum Compressors Shrinkage (materials) Nitrogen Diffusion (physics) Pressure Numerical analysis Simulation Steam Nitrogen oxides Combustion chambers Diluents
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in