NDLI: Effects of Bulk Flow Pulsations on Film Cooling With Compound Angle Holes: Heat Transfer Coefficient Ratio and Heat Flux Ratio

Content Provider	The American Society of Mechanical Engineers (ASME) Digital Collection
Author	Jung, In Sung Lee, Joon Sik Ligrani, P. M.
Copyright Year	2001
Abstract	Experiments are conducted to investigate the effects of bulk flow pulsations on film cooling from compound angle holes. A row of five film cooling holes is employed with orientation angles of 0°, 30°, 60°, and 90° at a fixed inclination angle of 35°. Static pressure pulsations are generated using an array of six rotating shutter blades, which extend across the span of the exit of the wind tunnel test section. Pulsation frequencies of 0 Hz, 8 Hz, and 36 Hz, and time-averaged blowing ratios of 0.5, 1.0, and 2.0 are employed. Corresponding coolant Strouhal numbers based on these values then range from 0.20 to 3.6. Spatially-resolved surface heat transfer coefficient distributions are measured (with the film and freestream at the same temperature) using thermochromic liquid crystals. Presented are ratios of surface heat transfer coefficients with and without film cooling, as well as ratios of surface heat flux with and without film cooling. These results, for compound angle injection, indicate that the pulsations cause the film to be spread more uniformly over the test surface than when no pulsations are employed. This is because the pulsations cause the film from compound angle holes to oscillate in both the normal and spanwise directions after it leaves the holes. As a result, the pulsations produce important changes to spatially-resolved distributions of surface heat flux ratios, and surface heat transfer coefficient ratios. In spite of these alterations, only small changes to spatially-averaged heat transfer coefficient ratios are produced by the pulsations. Spatially-averaged surface heat flux ratios, on the other hand, increase considerably at coolant Strouhal numbers larger than unity, with higher rates of increase at larger orientation angles.
Sponsorship	International Gas Turbine Institute
File Format	PDF
ISBN	9780791878521
DOI	10.1115/2001-GT-0129
Volume Number	Volume 3: Heat Transfer; Electric Power; Industrial and Cogeneration
Conference Proceedings	ASME Turbo Expo 2001: Power for Land, Sea, and Air
Language	English
Publisher Date	2001-06-04
Publisher Place	New Orleans, Louisiana, USA
Access Restriction	Subscribed
Subject Keyword	Temperature Blades Wind tunnels Coolants Film cooling Flow (dynamics) Heat transfer coefficients Liquid crystals Pressure Heat flux
Content Type	Text
Resource Type	Article

Sl.	Authority	Responsibilities	Communication Details
1	Ministry of Education (GoI), Department of Higher Education	Sanctioning Authority	https://www.education.gov.in/ict-initiatives
2	Indian Institute of Technology Kharagpur	Host Institute of the Project: The host institute of the project is responsible for providing infrastructure support and hosting the project	https://www.iitkgp.ac.in
3	National Digital Library of India Office, Indian Institute of Technology Kharagpur	The administrative and infrastructural headquarters of the project	Dr. B. Sutradhar bsutra@ndl.gov.in
4	Project PI / Joint PI	Principal Investigator and Joint Principal Investigators of the project	Dr. B. Sutradhar bsutra@ndl.gov.in Prof. Saswat Chakrabarti will be added soon
5	Website/Portal (Helpdesk)	Queries regarding NDLI and its services	support@ndl.gov.in
6	Contents and Copyright Issues	Queries related to content curation and copyright issues	content@ndl.gov.in
7	National Digital Library of India Club (NDLI Club)	Queries related to NDLI Club formation, support, user awareness program, seminar/symposium, collaboration, social media, promotion, and outreach	clubsupport@ndl.gov.in
8	Digital Preservation Centre (DPC)	Assistance with digitizing and archiving copyright-free printed books	dpc@ndl.gov.in
9	IDR Setup or Support	Queries related to establishment and support of Institutional Digital Repository (IDR) and IDR workshops	idr@ndl.gov.in